i put a tune on my work truck, 2004 f250 5.4 1wd lol

with the stock tune as typical with the trucks she stays in closed loop at WOT, after snooping around i figured out its because the open loop delay is set to 29 seconds and not because of the ful_311 sw, but in any case, this is the first strategy i've seen newer than 98 thats actually load based, tp has no control, it does in fact have an fn1360- table and the y-axis should be fn072b, however, rescaling fn072b so she only enriches after 78 load didn't have any effect, for some reason as soon as she gets into open loop shes jumping to the top cell in the table, i did verify that the table is getting used by changing the values and i can log exactly what i demand, but the problem im having is that i can't set the fuel table the way i want it because after 50 load shes jumping into open loop and grabbing the top cell no matter what i scale it to, for the time being i stoiched out the stabilized fuel table and am using the wot multiplier to enrichen, its working fine but its not exactly how i want it as i'd like slight enrichment prior to WOT

im thinking 'maybe' load is being scaled but i can't verify because i have no access to the prldsw nor the load scaling function

..any thoughts?

_________________
http://www.efidynotuning.com/ford/