I'm trying to open my datalogs from BE/Moates QH in EA and it just gives me an error saying the .csv file may be corrupt. I can open the datalogs in excel just fine. I am a noob and just trying to figure this out for the first time. Any ideas on what would cause this?

_________________
88 Mustang GT, 302, ProComp heads, TF street heat intake, Crane 2030 cam, 1.6 RR, 70mmTB, Accel 30lb. inj, GS-340/255 lph pump, PFT-77 MAF, equal length shortys, Tremec 3550, 3.55, A9L, Moates QH v1.6, BE, EA, Innovate LC-1

In the open dialog box, there's a drop-down that has a list of various log types to choose from. There are at least 2 different *.csv formats. Make sure the one you have selected is a BinaryEditor format, not something else. I do recall, EA used to default to the wrong one after a fresh install. It probably still does today.

_________________
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, 1.6RRs, FMS Explorer (GT40p) headers, Slot Style MAF, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, Innovate LC-1, GUFB, Moates QuarterHorse tuned using BE&EA

Member V8-Ranger.com

Tried all of the options none of them work.

_________________
88 Mustang GT, 302, ProComp heads, TF street heat intake, Crane 2030 cam, 1.6 RR, 70mmTB, Accel 30lb. inj, GS-340/255 lph pump, PFT-77 MAF, equal length shortys, Tremec 3550, 3.55, A9L, Moates QH v1.6, BE, EA, Innovate LC-1

Post your CSV...zipped.

_________________
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, 1.6RRs, FMS Explorer (GT40p) headers, Slot Style MAF, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, Innovate LC-1, GUFB, Moates QuarterHorse tuned using BE&EA

Member V8-Ranger.com

Here is one of it idling.

_________________
88 Mustang GT, 302, ProComp heads, TF street heat intake, Crane 2030 cam, 1.6 RR, 70mmTB, Accel 30lb. inj, GS-340/255 lph pump, PFT-77 MAF, equal length shortys, Tremec 3550, 3.55, A9L, Moates QH v1.6, BE, EA, Innovate LC-1

Yeah, I knew it had something to do with your file...in this case with your file name. Don't use dots in the filename. And avoid using spaces. Use underscores instead of spaces. All I did was downloaded your file, changed the dot and space to underscores, and EA opened it no problem.

_________________
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, 1.6RRs, FMS Explorer (GT40p) headers, Slot Style MAF, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, Innovate LC-1, GUFB, Moates QuarterHorse tuned using BE&EA

Member V8-Ranger.com

Thank you! That worked. I figured it was something simple I was overlooking.

_________________
88 Mustang GT, 302, ProComp heads, TF street heat intake, Crane 2030 cam, 1.6 RR, 70mmTB, Accel 30lb. inj, GS-340/255 lph pump, PFT-77 MAF, equal length shortys, Tremec 3550, 3.55, A9L, Moates QH v1.6, BE, EA, Innovate LC-1