I thought of something that would be helpful down the road. The ability for a user to define their own Folders in the Tree. I.e. I might like to have a Folder with a name "Things Working On". Then allow a user to drag and drop leaves from other trees into this new folder. They would be copies, not moves.

Thus you would have one place to go for some PID's you happen to be playing with right now.

_________________
93 Ford Tbird SC 5speed 3.8l (441hp/462tq) V6 2.0l autorotor 80lb/hr injectors. Valves 1.84I/1.57E CAM: 218 in 224 ex lift is .555/.555 114 lobe sep, Rhoads VMAX lifters, stud mounted adjustable rockers. 9:1CR Forged Wiseco custom pistons, Scat 6.2" (long) H-Beam Rods. 75mm throttle body, 80mm C&L MAF (ford factory electronics) Snow Methanol Injection ; Liquid/Air intercooler; Moates QH 1.6; BE 2010; Innovate LM1 & AuxBox

I like the idea. It sure is not a easy task to implement.

_________________
Car Info
EEC Analyzer & Binary Editor
Other Photos

Could you add a smaller "user" tree, where the users could create folders and anything drug in would create shortcuts? Might be easier than trying to implement it in the current tree.

_________________
1978 Mustang II King Cobra
89 5.0HO, Stock Short Block, Edelbrock 4bbl aluminum intake, Holley 650 double pumper, MSD 6AL, Ford F303 cam, 1.7:1 Crane Roller Rockers, Pocket Ported stock heads, Hedman Long Tube Headers
5 spd Manual
Full roll cage, 9" full floater w/Currie trac lock/373 gears, RCI Fuel Cell
Project Page: http://www.brandttuning.com/projects.htm

Just a note Clint. I just updated from BE 2010 b8 to build 18. The check boxes is a nice intermediate step. This allows you to check off those things you are working on, and they easily located them again say to make an adjustment after you drive around and stop in a parking lot.

thanks.

_________________
93 Ford Tbird SC 5speed 3.8l (441hp/462tq) V6 2.0l autorotor 80lb/hr injectors. Valves 1.84I/1.57E CAM: 218 in 224 ex lift is .555/.555 114 lobe sep, Rhoads VMAX lifters, stud mounted adjustable rockers. 9:1CR Forged Wiseco custom pistons, Scat 6.2" (long) H-Beam Rods. 75mm throttle body, 80mm C&L MAF (ford factory electronics) Snow Methanol Injection ; Liquid/Air intercooler; Moates QH 1.6; BE 2010; Innovate LM1 & AuxBox

the check boxes are for exporting them to a template file.

_________________
Car Info
EEC Analyzer & Binary Editor
Other Photos