So I'm in the process of trying to tune my car.. I had it idling for about 4 mins trying to datalog which failed.. But now the car won't start.. I'm thinking I fouled my plugs so I went out and bought new ones.. Couldn't change them cause I could find my gaping tool.. Could that cause the car not to start I got a pic of the plug pulled 3 they looked the same..

_________________
95 gt vert,302 .040 over,VORTECH T TRIM (intercooled), AFRs185, TFS Track Heat & Stage 1 cam,BBK l/t headers & mid pipe, 75mm tb,80lbs inj,340lph,hpx maf,
Tuning with LC1, Moates QH, 2010 BE and EECA Sailorbob CBZA,j4j1.. stock T5

im no good at reading plugs here is a diffrent plug

_________________
95 gt vert,302 .040 over,VORTECH T TRIM (intercooled), AFRs185, TFS Track Heat & Stage 1 cam,BBK l/t headers & mid pipe, 75mm tb,80lbs inj,340lph,hpx maf,
Tuning with LC1, Moates QH, 2010 BE and EECA Sailorbob CBZA,j4j1.. stock T5

never mind it was something on the tune not sure what but i started over and it works fine guess i have some new plus for when im done with the tune

_________________
95 gt vert,302 .040 over,VORTECH T TRIM (intercooled), AFRs185, TFS Track Heat & Stage 1 cam,BBK l/t headers & mid pipe, 75mm tb,80lbs inj,340lph,hpx maf,
Tuning with LC1, Moates QH, 2010 BE and EECA Sailorbob CBZA,j4j1.. stock T5

Those are still pretty fouled, you're running rich.

_________________
1978 Mustang II King Cobra
89 5.0HO, Stock Short Block, Edelbrock 4bbl aluminum intake, Holley 650 double pumper, MSD 6AL, Ford F303 cam, 1.7:1 Crane Roller Rockers, Pocket Ported stock heads, Hedman Long Tube Headers
5 spd Manual
Full roll cage, 9" full floater w/Currie trac lock/373 gears, RCI Fuel Cell
Project Page: http://www.brandttuning.com/projects.htm

Thanks for the reply..

_________________
95 gt vert,302 .040 over,VORTECH T TRIM (intercooled), AFRs185, TFS Track Heat & Stage 1 cam,BBK l/t headers & mid pipe, 75mm tb,80lbs inj,340lph,hpx maf,
Tuning with LC1, Moates QH, 2010 BE and EECA Sailorbob CBZA,j4j1.. stock T5