Search found 14 matches

by stangsrule
Sat Oct 11, 2003 7:38 pm
Forum: Lounge
Topic: How do I set up my Wideband from Techedge?
Replies: 1
Views: 3480

There are some detailed instructions in the FAQ section. If it is a Ver. 2.0 then use the pin #1 out. That is the Svout that the TwEECer needs. On my car (1992 GT I tied into the wire going to the car's computer for the EGR position. #27. Don't know what year you have so you may have to look it up. ...
by stangsrule
Sun Sep 21, 2003 6:58 pm
Forum: Hardware Discussions
Topic: Hooked up new wideband but have a couple of questions...
Replies: 1
Views: 3724

Hooked up new wideband but have a couple of questions...

Ok I finally got around to hooking up my ver. 2.0 OZ DIY wideband to the TwEECer today and I have a couple of questions... First off it is on a 92 GT and I used pin 27 dark brown with a green stripe. This is the right wire isn't it? I pulled the plug at the EGR so that wouldn't be an issue. I also u...
by stangsrule
Thu Sep 18, 2003 2:31 pm
Forum: Tuning the EEC....
Topic: Would anybody be interested in doing this?
Replies: 40
Views: 40834

I'm all for anything that helps us all out. The TwEECer is an awesome device but the learning curve is way to steep and current documentation is too sketchy and strung out all over the place... What kind of fee are we talking about anyway? If reasonable, I might be interested. 8)
by stangsrule
Thu Aug 28, 2003 1:48 pm
Forum: Hardware Discussions
Topic: Tweeker Cables? Proprietary or Standard?
Replies: 3
Views: 5819

Standard USB cable for the computer connection and standard RJ45 for the switch.
by stangsrule
Sat Jul 19, 2003 2:12 am
Forum: Lounge
Topic: Looking for good place to buy Car Trailor.
Replies: 1
Views: 3263

You might try this place: http://www.hhtrailer.com/ they will let you know if there is an authorized dealer in your area.
by stangsrule
Sat May 31, 2003 2:20 am
Forum: Hardware Discussions
Topic: CalCon results are not correct
Replies: 9
Views: 10390

:oops: DOH!!! That makes perfect sense Mike, thanks for pointing out what should have been obvious to me in the first place... Never occured to me to re-write to the TwEECer... Will give that a shot! 8) Thanks again!!!
by stangsrule
Fri May 30, 2003 3:24 am
Forum: Hardware Discussions
Topic: CalCon results are not correct
Replies: 9
Views: 10390

I could be mistaken here but if I understand things correctly, I can't just download a new dat file and make it work... I have an 80mm mass air from Kenne Bell (actually from Ford) that is not calibrated as it relies on the computer to take care of it. I bought the mass air and a chip combo from KB ...
by stangsrule
Tue May 27, 2003 1:47 am
Forum: Hardware Discussions
Topic: CalCon results are not correct
Replies: 9
Views: 10390

Anybody???
by stangsrule
Sun May 25, 2003 10:43 pm
Forum: Hardware Discussions
Topic: CalCon results are not correct
Replies: 9
Views: 10390

I have the RT on a fairly heavily modified 92GT with an A9L and using the dump from my Kenne Bell chip. I messed around a little last year with the data logging and all seemed fine. I just borrowed a lap top again a few weeks ago (I still need to buy one :wink: ) and now even though the data logging...
by stangsrule
Tue Jan 07, 2003 2:05 pm
Forum: Lounge
Topic: fords new gt-40 program
Replies: 10
Views: 11275

I vote for the V-10, and the owners can always add a blower or turbos afterwards! :D Will there be a V-10 at the Chicago Auto Show? 8)
by stangsrule
Sat Jan 04, 2003 2:26 am
Forum: Lounge
Topic: Pilot Bearing Issue
Replies: 5
Views: 6575

Daren, I agree with the above and you are correct in stating that it is not an urgent matter... I have driven mine for a year or two like that with no problems. I wouldn't worry about it unless you are bored or dropping the tranny for another reason anyway. 8)
by stangsrule
Sat Nov 16, 2002 6:54 pm
Forum: Hardware Discussions
Topic: calcon not working
Replies: 10
Views: 12716

See my last post in Tweaking the EEC"
by stangsrule
Sat Nov 16, 2002 3:59 am
Forum: Hardware Discussions
Topic: calcon not working
Replies: 10
Views: 12716

I wondered when you pointed out that it was a SN95 file... :D I will give this new one a try and let you know what I find out. Thanks a lot Mike! 8)
by stangsrule
Wed Nov 13, 2002 4:04 pm
Forum: Hardware Discussions
Topic: calcon not working
Replies: 10
Views: 12716

I am having the same problem with my 92GT with the A9L. Mike sent me the updated file and I just got done trying it but there is no change... I am at a loss as to what the problem is, everything looks like it should work but it doesn't. I am sure it is probably something really simple, it usually is...