EECTuning.org

desmo996

Removed original post, that can still be seen right below, because;

I am feeling much better now and I was a little harsh on ERStettin

desmo996

I wouldn't recommend the PF Z pads for any kind of Open Track event or HPDE. I have seen them fail after 3 laps around Road Atlanta. The Hawk HP+ pads are much better.

desmo996

Thanks Dale, I believe that is how I am planning on routing mine also.

Klondike, How in the world did you get it all the way up to the airbox? My harness can't be 2' in length.

desmo996

Is there anything specific your wondering about? Daren Nope, just living my Big brake dream vicariously through you. How about posting some pictures after the install. I had a 96 Cobra with essentially the same brakes, and I too found them a little prone to fade after repeated stops. Stock brake pa...

desmo996

I was wondering if anyone had any suggestions or even better pictures of their WB install. I have LT headers and the WB o2 bung was welded into the matching x-pipe as close to the collector as reasonably possible. The problem is now I don't have enough length in the harness to get to a secure (prefe...

desmo996

Have you tried reloading your payload?

desmo996

I went through a very similar problem with mine a little while back. The only difference is I don't remember if I ever reloaded 1.19 and tested it. I went through the cycle of uninstalling everything, including Windows once, and reinstalling everything several times. I eventually just had to send th...

desmo996

Have you had a chance to test out the brakes yet?

desmo996

Painless wiring makes a harness without all of the unnecessary sensors. If you look them up on the web, you can get more info from them.

desmo996

I thought what Ed was asking for was what we were all shooting for. I guess I missed the post where things got too complicated

desmo996

Somewhere in between there has to be a solution. I don't remember anyone asking for a software package, just a Documentation section of this board, like the one Raymond B has, so we can put together a list of all the scalar, table and function definitions for the different processor strategies.

desmo996

30 days to return with a 15% hit

desmo996

I recently had to be without my TwEECer for 2 weeks, it was a living hell, I got so frustrated and ornery with the car that I was unbearable to be around. My wife moved out, my kids disowned me. :shock: All kidding aside, the point I am trying to make is that as is the TwEECer has some incredible ca...

desmo996

Not trying to start anything but isn't this your forum, Jon94GT? Why does it require Mike's permission to do something that you would like to do?

desmo996

I don't know anything about the o2, but the MAF display in Calcon, if you also datalog the MAFv, it will display the voltage with the kg/hr appendix. At least it does for me.

desmo996

1st thing we need to know is are you using 1.20b3 of the TwEECer software? And what EEC calibration you are working with?

desmo996

It comes as part of Microsoft Office($400 standard Full version) or I believe you can buy it individually for about $250 or so. If your have Word or any Office program, your best bet is to look for a good price on the upgrade version, save you a bunch of money

desmo996

WOO HOO! Got my TwEECer back today in the mail, THANKS Mike and Raymond B. :D

desmo996

That's not funny, I wouldn't put it past him. :D

desmo996

I just wanted to see if there has been any update on my TwEECer.

desmo996

Don,

I had problems 1 & 2 shortly before it quit working altogether, and I think everyone with 1.20b3 and a SN95 has problem 4. I don't have any solutions, I just wanted to let you know you aren't alone.

desmo996

can I steal them also? I didn't know I could do that, there are a couple I would like to have in my arsenal. Or is it only possible for you to post them because it's your site.

desmo996

I don't have the double write problem, but I have had your second problem a couple times. I don't know a fix, I figured it might make you feel better to know you are not alone. I have read from time to time to double check the last values in your MAF transfer to make sure it hasn't by some magical f...

desmo996

I probably would Murdock if I actually took a break from it.

desmo996

I think it might be worth mentioning that the dimple is at position 1 or A in the above example.

desmo996

Sounds like you have put a lot of work into 1.20 Final. I am anxious to see it in May. :D

desmo996

Yes, the copy function works for me. I too have had to start from a fresh binary and copy everything over. The only thing that doesn't copy is the scalars, so you may want to write them down or something, they have to be retyped in.

desmo996

:D where is :nice: or

desmo996

1. that is a normal response. 2. You may have to rewrite all of your cal. files to the TwEECer, once you have built your payload, as the two are not compatible. Once the payload has been selected, you do not have to re-enter the payload everytime you make a change. You just do it once and when you w...

desmo996

Thanks Raymond. I appreciate you keeping me informed.

Search found 91 matches

FJO Wideband Install Help

I would like more smiley choices