EECTuning.org

xd41efisc

I don't know if AU is the same, but I have read that EL needs the power steering pressure switch to be working properly to enable MFA.

xd41efisc

O.K I had to think about that for a few minutes.

So in the example above:
6e9e: b3,73,3d,01,42 the 3d,01 is 2 bytes this makes it UNSIGNED and
6ecb: b3,72,48,42 the 48 is 1 byte making it SIGNED.
Or am I way off track.

Thanks.

xd41efisc

Ok thanks. Yes it is A9L. I have come across something else that I can't work out. Using these register bases: rbase 72 180 rbase 74 27e rbase 76 37a rbase 78 8eda At these locations: 6e9e: I see [R72+13d] if I do the calculation 180+13d I get 2bd this is fine. 6ecb: I see [R72+48] if I do the calcu...

xd41efisc

Thanks mate, I got the last part. But I don't get the first part. I see 93a8 at 2028 and 8fd6. At 93a8 i see 9430. 8 2022: 00,8c 8c00 RBASEADR_01 Rbase Rf0 8 2024: 5a,8e 8e5a RBASEADR_02 Rbase Rf2 8 2026: d6,8f 8fd6 RBASEADR_03 Rbase Rf4 8 2028: a8,93 93a8 RBASEADR_04 Rbase Rf6 8 202a: 30,94 9430 RB...

xd41efisc

Hi, I am trying to work out how the code below points to an address. I thought I worked this out a few years ago, but have spent a few hours and can't work it out. I guess that is what happens when you leave things for a while. Below is a bit of the code from tvrfan I am looking at. I am trying to w...

xd41efisc

I would post the doc here, but it's not even close to ready for public consumption. There's way too much speculation and assumption being made right now. But if individuals are interested in reading it over, I'd be glad to email it out. PM me with contact details. I would like to read your thoughts...

xd41efisc

I see all the support literature has gone from the site as well! They could have at least given some warning so we could have made copies of documentation that is needed to use some of this stuff. They could also have passed the documentation on to sites like this, so the people who have supported ...

xd41efisc

The BMW charging up is a Western Australia taged car.

xd41efisc

Yeah I did test it out and the A9L is putting an output on pin 34, but it did not appear to be right.
I was going to look into it a bit more but have not had time.
Looks like f4ll3n has already worked it out.

xd41efisc

Hi Mate, I thought the GUFB tune ran the trip computer, when loaded into a EB ecu. My brother has an XF Fairmont Ghia with NC Fairlane 5.0, and I had a GUFB/A9L running in it for a while when I was testing some things , and I was sure the trip computer worked. I will have a look at swapping the A9L ...

xd41efisc

Hi,

Thanks it makes some sense, but what changes Ra0 from 0 to 1?

I am using SAD 0.2, by the looks, I thought it was 3.08, I will look into it again.

Thanks.

xd41efisc

Hi, I have a very limited knowledge of what is going on with the the disassembly code I have made using tvrfan's SAD. I have played around with arduino's a bit, but I am no expert. I am an Electrician, and spent most of my time with relay logic systems. I have been looking at a disassembly I have he...

xd41efisc

Just for kicks you should be able to load the GUFB A9L on the QH and see if it behaves the same. I am just wanting to rule out an error in the definition file or corrupted tune... This will not work on the EEC he is using. It will only work on EB/ED EEC IV not EF/EL EECV, I have tried it before. It...

xd41efisc

You have a few options for data logging with an EB EEC using a QH, but you will need to spend some money for one of them. 1: Message Derek Fenwick (sailorbob on here) to see if he has a Binary Editor strategy file for that EEC, it is closely related to GUFB and the hardware is almost identical to a ...

xd41efisc

I tried to set this up on mine a couple of weeks ago. The injectors (Matrix 334) I got will not run off the EEC5 with resistors, they will not even open with any resistor the line when connected direct to a 12v battery, I tried a few different values from 10-4ohm, they will hold with the resistors, ...

xd41efisc

Did you end up getting this up and running? I am looking at doing this using LPG. I have a 6 cylinder on injected gas at the moment it is using a gas computer to run the gas injectors, after getting a signal from the EEC petrol injector outputs. I am converting over to a 5.0, and I have a gas system...

xd41efisc

Its been 7 months since I did the chip install and it is still going good. I was trying to figure out a clean way to do that. I'm looking forward to seeing your diagram. I just dropped it since I was going to swap to an EEC-V this winter anyway. Below is the diagram I used, it works like this: The f...

xd41efisc

http://i400.photobucket.com/albums/pp90/xd41efisc/NDS.jpg The diagram above is how Ford OZ wired the Series 1 EB Falcon, NC Fairlane, DC ltd. The ECUs in these were all basically A9L with some mods to the binary for auto trans torque truncation stuff, and some components removed for the speedo sens...

xd41efisc

The engine needs to be running from memory.

xd41efisc

I tested it yesterday, and it all works fine. The speedo is out compared to the cars dash speedo, but the cars speedo is out to a GPS, the BE speedo seems to read a lot closer to the GPS. I will need to do something about the car speedo, It has always been out, and changing drive gears has made no c...

xd41efisc

Thanks mate, That is what I was thinking needed to be done, but when I tried to do it before it did not work properly. It seems to be good now, will test it tomorrow, its 11.30pm here at the moment and the neighbours might not like me making noise now. Also BE 2010 has the preferences but they don't...

xd41efisc

I am using BE 2010 and a GUFB strategy to tune a few 5.0s me and my brothers have. I also have a supercharged 6 cylinder that I use a GURE strategy that Derek supplied me. Now living in Australia and coming into this world 5 years after we converted to metric, I find it a pain in the ass trying to u...

xd41efisc

Yeah mate they are from a GURE EEC, I had a GURE (C0S) and GUFB (A9L) side by side when I compared them, I have a bit more to add about a few other thing missing from the GUFBs, but the above is what is related to the chip. I spent about 4 hours tracing all the connections to that chip, but found a ...

xd41efisc

Dereck I had a bit more of a look after you mentioned the diode, and it probably should have it, also there is a capacitor on the back of the board that wont hurt to be fitted as well. It looks like the main purpose for this chip is for the Cruise control on the GUREs, but it also does the low fan c...

xd41efisc

This is the photo of the Chip and Capacitor you need to add for the low speed fan control.
Both circled, Capacitor is to the left bottom to the right of the main connector.

: A9L Fan Chip2.jpg (417.23 KiB) Viewed 42885 times

xd41efisc

Just finished checking if this works properly, and it does. I took a few photos just need to load them on here some how. The wiring for the relays is a bit of a pain, I need 4 relays to get it to work the way Ford set the fans up over here (on EL/XH Falcons). They use 2 fans and run them in series f...

xd41efisc

Also does anyone have a schematic of the fan control on a GURE equipped Thunderbird.

Thanks.

xd41efisc

O.K. I did a bit of playing around with this again today, I had compared GUFB and GURE EECs before to see what was missing for the fan control. Today I got around to unsoldering (pain in ass but doable) a 71001FB chip from an old XF Falcon 6AA EEC i had lying around. I then sucked the solder out of ...

xd41efisc

I just got a new laptop and need to put BE on it. The old laptop is still working fine, i am writing this from it, it has a power jack that is a bit dodgy, it's o.k. on a desk but plays up in the car, and its still on XP or Linux depending on what hard disk is in it. BE2010 runs fine and does everyt...

xd41efisc

Go into XDF.
Then go down to XDF Header Editor.
And check that the:
Bin Size (Hex) = E000.
Base Offset = 2000 and the subtract box is ticked.

See if that helps.

Search found 100 matches

Re: Lean cruise (MFA) (MPG) mode not switching on sometimes

Re: CMPB question.

Re: CMPB question.

Re: CMPB question.

CMPB question.

Re: Modern day potential of J3 devices beyond TwEECer and QH

Re: Moates -- No Longer Selling Hardware

Re: California to make EEC retuning illegal

Re: Looking for DOL in Gufb for tripcomputer

Re: Looking for DOL in Gufb for tripcomputer

Re: Meaning of disassembly underscore.

Meaning of disassembly underscore.

Re: Rich on Decel

Re: Australian EEC strategies working in US software & hardware

Re: Anybody ever used a Ford EEC with a CNG/LPG system?

Re: Anybody ever used a Ford EEC with a CNG/LPG system?

Re: A9L Fan control

Re: Manual car and EEC 9AL with C4 trans

Re: electric cooling fan on A9L?

Re: GUFB and metric units.

Re: GUFB and metric units.

GUFB and metric units.

Re: A9L Fan control

Re: A9L Fan control

Re: A9L Fan control

Re: A9L Fan control

Re: A9L Fan control

Re: A9L Fan control

New Laptop and transfering BE2010.

Re: Two A9L Bins totally different