Search found 219 matches

Go to advanced search

by 93notch
Fri Apr 15, 2005 11:59 pm
Forum: Tuning the EEC....
Topic: Tweecer for '03 Cobra?
Replies: 21
Views: 31466

It has been available for the last year and is listed on our supported processor list.
by 93notch
Mon Apr 11, 2005 11:49 pm
Forum: Tuning the EEC....
Topic: Gen III SHO?
Replies: 6
Views: 12272

I should already have base model support, give me a couple of processor catch codes to verify against and take a look at the RT feature.
by 93notch
Mon Feb 07, 2005 12:06 pm
Forum: Lounge
Topic: Mike - Shift Schedules for CDAN4?
Replies: 7
Views: 9959

Yes!!! But, no shift schedules for you!!!! (soup natzi voice).

Why dont you come by, except when you want something from me!!! I feel so violated!!!
by 93notch
Mon Feb 07, 2005 11:53 am
Forum: Hardware Discussions
Topic: won't read eec
Replies: 1
Views: 4887

You have the EEC out of the car and connected to the tweecer & pc/laptop? Do you have the bank count set to 1 and strategy set to A9L?? The A9L is a single bank processor and if the strategy is not set correctly, it is possible for it to display all zero's.
by 93notch
Wed Jan 05, 2005 9:18 pm
Forum: Tuning the EEC....
Topic: TwEECer on the Focus?
Replies: 41
Views: 61220

Finally have Focus support

If anyone is still watching this thread -- (yeah right) -- we have finally got base support for 2000 - 2002 and possibly more. I dont have a complete EEC to year model map. We will being selling these once we finish the RT support. That said, I need at least one (two if possible) person to purchase ...
by 93notch
Wed Jun 09, 2004 3:00 pm
Forum: Lounge
Topic: Dynoed the 331 67mm single Turbo setup
Replies: 10
Views: 15582

Hey Thunderstang, Yes, I am currently still running stock rails, but I am looking at replacing the front half of the fuel system and putting in my 83lb injectors, low impeadence driver and possibly a box upper. Finally got it to HRP Sunday and while I am VERY rusty, the biggest problem was running o...
by 93notch
Sat Jun 05, 2004 8:42 pm
Forum: Software Issues & Support
Topic: MAF Voltage/KG doesn't work
Replies: 4
Views: 7806

I am not saying that there is no maf volts, it just is no longer called MAFV as in prior years. I did find MAF A/D counts (I think) but obviously that is another step and I am trying to keep the additional processing to a minimum.
by 93notch
Sat Jun 05, 2004 8:41 pm
Forum: Software Issues & Support
Topic: Datalogging procedure for 1.30AX
Replies: 11
Views: 21710

Did you read the Getting Started PDF file that comes with 1.30Axx?? It (and the readme on the About Tab) list the strategy vs year/models and your 99 uses minimum 2 banks. If you only write 1 bank to your tweecer your fan and pump will come on and stay on.
by 93notch
Sat Jun 05, 2004 8:23 pm
Forum: Hardware Discussions
Topic: Switch settings
Replies: 3
Views: 7117

Hey 93Cobra, RT130xx versions of the software come with a Getting Started PDF file that will answer your questions. Your sales receipt tells you to download the software from the website. We are working new and complete docs including descriptions for all parameters. This site is our documentation, ...
by 93notch
Sat Jun 05, 2004 8:01 pm
Forum: Software Issues & Support
Topic: Calcon issue
Replies: 9
Views: 15791

I am sure glad that it was an easy fix, BUT!!! Why did it not get updated when you installed A9??? Did you possibly have calcon open when you installed A9 over A8?
by 93notch
Sat Jun 05, 2004 1:19 pm
Forum: Software Issues & Support
Topic: Calcon issue
Replies: 9
Views: 15791

I have not seen any other posts (that I remember) regarding the CDAN4 stuff, since A8. I use the CDAN4 stuff last weekend on a 97 TBird with a eaton SC on it and had no problems.

omillar, send me an email at info@tweecer.com and I will send you a slightly updated calcon.exe for you to try.
by 93notch
Fri Jun 04, 2004 3:16 am
Forum: Software Issues & Support
Topic: MAF Voltage/KG doesn't work
Replies: 4
Views: 7806

1998 and up no longer have MAFV register, but I did find the AD counts register for the voltage -- I cannot believe that Ford does not have even a temporary register for voltage. As for kg/hr, I tuned a 98 cobra two weeks ago and did not see any problems with it........dunno, but I will check on it....
by 93notch
Fri Jun 04, 2004 3:12 am
Forum: Software Issues & Support
Topic: Fan problems and questions for a 1995 GT
Replies: 8
Views: 14067

It is calcon that has it wrong. We used to log the actual value for the fan state register which people could not really use in a spread sheet, so we filter it down to 1 or 0 now and have not updated it in the display.
by 93notch
Fri Jun 04, 2004 3:02 am
Forum: Hardware Discussions
Topic: Can we datalog an LA3??
Replies: 2
Views: 6056

Yes, but it is incomplete. The datalogging works, but not all of the registers have been defined. You have an LA3 in your Merkur? Did you build the payload, check the datalogging checkbox and then write tweecer?

Which version of the software are you using?
by 93notch
Fri Jun 04, 2004 2:59 am
Forum: Hardware Discussions
Topic: bde install ?
Replies: 0
Views: 3869

ignore any errors from the BDE, it was released in 97 or 98 and there were no 100gig drives available. It will not affect its operation. Install the BDE and then RT130A9.
by 93notch
Fri Jun 04, 2004 2:56 am
Forum: Hardware Discussions
Topic: Tweecer fit to case
Replies: 3
Views: 6196

To make a one size fits all (EEC's) we had to space the tweecer connector out some. The A9L's case is stamped, but he 94 and up EEC cases are cast and a bit over 1/4 of an inch thick back where the J3 port is. So a generic length on the connector was decided on. Good idea on the spacers.
by 93notch
Tue May 25, 2004 12:40 pm
Forum: Hardware Discussions
Topic: 97 Blown Cobra .bin?
Replies: 8
Views: 13696

Look in the files section of our yahoo group, in the mod-bin folder. There are a couple of blown CDAN4 binaries in there good for reference.

http://autos.groups.yahoo.com/group/twe ... s/Mod-BIN/
by 93notch
Tue May 25, 2004 12:37 pm
Forum: Hardware Discussions
Topic: installation questions ...
Replies: 2
Views: 6232

My normal installs route the USB cable up over the back of the glovebox and the switch cable under the carpet to the console and come up through the ashtray.

We have ad customers remove the switch from the case and mount on a panel where the stereo would be. HTH.
by 93notch
Tue May 25, 2004 12:09 pm
Forum: Hardware Discussions
Topic: Stupid Q: Win 98 OK?
Replies: 2
Views: 5334

The problem with Win98 is that it did not ship with USB support and the service pack that adds in USB support -- well, it sucks!!! Win98SE shipped with USB support and has not shown any quirks with its USB support.
by 93notch
Fri May 21, 2004 11:31 am
Forum: Lounge
Topic: Dynoed the 331 67mm single Turbo setup
Replies: 10
Views: 15582

Hey Thanks guys, its been a long time coming to get my own car up to where I want it -- of course, I need a little bit more!! :lol:

Here is a link to the logfile for the dynojet graph:

http://www.tweecer.com/dl/040505134758.zip
by 93notch
Tue May 18, 2004 4:49 pm
Forum: Lounge
Topic: How do you say Tweecer?
Replies: 6
Views: 11554

Yes, it can be confusing -- many calls come in asking if we are the "TwEESer" company. We used to have a line specifying the pronounciation as "Tweaker", but I think I removed it.
by 93notch
Thu May 13, 2004 12:42 pm
Forum: Software Issues & Support
Topic: Datalogging is not fast enough?
Replies: 53
Views: 75384

Sorry. Read the TwEECer position that has the binary where you are trying to datalog from. Save it to a file and email it to me. When you read it from the TwEECer, it will have the payload in it and I can look at the file and make sure that the payload is being written correctly.
by 93notch
Wed May 12, 2004 11:45 pm
Forum: Software Issues & Support
Topic: Datalogging is not fast enough?
Replies: 53
Views: 75384

Tim,

Send me a zipped logfile and read your calibration back from the tweecer so it has the payload in it. Let me check and see wtf is up with this turd.

info@tweecer.com
by 93notch
Wed May 12, 2004 11:42 pm
Forum: Lounge
Topic: Dynoed the 331 67mm single Turbo setup
Replies: 10
Views: 15582

Hopefully no wheel stands, already had one small one on the street and that is enough. She has more in her, but that should be safe enough to keep the block together until I can get something a bit more stout.
by 93notch
Tue May 11, 2004 4:51 pm
Forum: Lounge
Topic: PC configurable Digiscope (Osilliscope)
Replies: 6
Views: 9577

Hey Dale, Depending on how involved you want to get, you can actually use a sound card as a single channel oscope. That said, back in the early 90's I used several of those PCI AD boards and they worked well, though one of the NI boards I tried had some problems. I have not used that particular comp...
by 93notch
Tue May 11, 2004 4:46 pm
Forum: Tuning the EEC....
Topic: Explorer ECM
Replies: 246
Views: 713528

94-95 v6's are also EECV not EECIV and follow the Crown Vic strategy of CCAQ/CCAQE.
by 93notch
Tue May 11, 2004 4:43 pm
Forum: Lounge
Topic: Dynoed the 331 67mm single Turbo setup
Replies: 10
Views: 15582

Dynoed the 331 67mm single Turbo setup

Well I finally got the car on the dyno and while I am very pleased with the results -- there is more in the combo. I am only running a spark plug that is one range colder than stock and I think I need to drop one more level. As the engine got heat soaked, I got some misfire or pre-ignition at high r...
by 93notch
Tue May 11, 2004 9:35 am
Forum: Software Issues & Support
Topic: A9 version does not datalog correctly
Replies: 24
Views: 36197

From what I have learned.. using the A9 version... I created a new payload and it works fine except for when I shut the car off before stopping my datalogging. before it would just stop the datalogging as it should and allow me to close the window.. now if I just turn the car off, the window freeze...
by 93notch
Sat May 08, 2004 7:13 pm
Forum: Software Issues & Support
Topic: Datalogging is not fast enough?
Replies: 53
Views: 75384

I dont have another... I'll see if I can find someone that will let me use theirs... Here are somemore #'s at WOT.. You can see an almost 1 full second it skips during it.. 126.943 127.784 128.205 Which Strategy are you using with your Cobra? Can you send me a 4 bank copy of your stock binary??
by 93notch
Thu May 06, 2004 4:37 pm
Forum: Tuning the EEC....
Topic: Explorer ECM
Replies: 246
Views: 713528

I am not sure if I have already posted these items, but thought I would post, just in case. I will see what else I can find specific to the subject. I am not ready right now, but after I upgrade my block this winter I will sure be ready to try it out. - HP_CID = A flag indicating cylinder # Identifi...