Search found 35 matches

by bad86capri
Tue Dec 27, 2022 8:45 am
Forum: Lounge
Topic: Season's greetings
Replies: 1
Views: 121

Re: Season's greetings

Merry Christmas!
by bad86capri
Mon Dec 05, 2022 8:31 am
Forum: Tuning the EEC....
Topic: 2003 Mach 1 glowing header
Replies: 3
Views: 245

Re: 2003 Mach 1 glowing header

Update on all of these issues. PATS- One of the red noise suppressor wires that go the diodes on the back of the head had a missing connector and was shorted out causing it to blow one of the big 30A fuses in the under hood box. Glowing Header- was caused by a bad IAC that was brand new. High idle i...
by bad86capri
Mon Dec 05, 2022 8:27 am
Forum: Tuning the EEC....
Topic: Autologic chips
Replies: 3
Views: 247

Re: Autologic chips

David was you able read the chip using B.E? I have a couple of old auto logic chips my buddy gave me and i could not read them. I tried B.E and tunerpro. Im not sure what software was used to read and program these chips.
by bad86capri
Mon Nov 21, 2022 4:48 pm
Forum: Tuning the EEC....
Topic: 2003 Mach 1 glowing header
Replies: 3
Views: 245

Re: 2003 Mach 1 glowing header

Well another weird issue im having now is after I pulled the QH im getting the PATS code. The car will not start and I'm getting the dashes on the odometer. I haven't tried reinstalling the QH yet but I think it's very strange.
by bad86capri
Sat Nov 19, 2022 2:24 pm
Forum: Tuning the EEC....
Topic: 2003 Mach 1 glowing header
Replies: 3
Views: 245

2003 Mach 1 glowing header

Finally got the mach 1 started and running. Im using the FBGIO and AMZ2 bin. I have all HEGOs disabled except bank 1. That hego is showing as being Failed. Could that make the passenger side header glow red? Also this is my first mod motor car that ive tried to tune and or work on. Also its idling a...
by bad86capri
Thu Nov 17, 2022 11:56 am
Forum: Tuning the EEC....
Topic: Stock 03-04 Mach 1 bin
Replies: 7
Views: 347

Re: Stock 03-04 Mach 1 bin

jsa wrote: Tue Nov 15, 2022 1:52 pm OEM Tune File.
Bank order may be different to whatever you are comparing too.
Thanks! I'll definitely give it a look over.
by bad86capri
Thu Nov 17, 2022 11:55 am
Forum: Tuning the EEC....
Topic: Stock 03-04 Mach 1 bin
Replies: 7
Views: 347

Re: Stock 03-04 Mach 1 bin

If decipha has everything for free, feel free to hit him up for what you need. Assuming you have a quarterhorse, have you tried installing it on your mach 1 ecm and try reading the tune off the ecm? I have read off the factory tune and added the PATS to my startup tune using my quaterhorse. I have ...
by bad86capri
Tue Nov 15, 2022 11:52 am
Forum: Tuning the EEC....
Topic: Stock 03-04 Mach 1 bin
Replies: 7
Views: 347

Re: Stock 03-04 Mach 1 bin

Im not sure what the encrypted version youre referring is. I think ill stick with what decipha has come up with and go from there. The only reason i was wanting to look over the factory bin was for reference only.
by bad86capri
Fri Nov 11, 2022 10:31 am
Forum: Tuning the EEC....
Topic: Stock 03-04 Mach 1 bin
Replies: 7
Views: 347

Re: Stock 03-04 Mach 1 bin

Actually i need the strategy. i may buy it from core tuning but didnt want waste money on something that im going to use as a reference only.
by bad86capri
Wed Nov 09, 2022 1:40 pm
Forum: Tuning the EEC....
Topic: Stock 03-04 Mach 1 bin
Replies: 7
Views: 347

Stock 03-04 Mach 1 bin

Does anybody have a stock Mach 1 tune they would willing to share? Im planning on using the fbgio stategy from decipha but im also wanting to look over factory mach tune with B.E. Thanks
by bad86capri
Fri Aug 12, 2022 6:53 am
Forum: Tuning the EEC....
Topic: Is Lambse adjustable
Replies: 3
Views: 940

Re: Is Lambse adjustable

So your base fuel table is the lambse that the ecu is commanding. Theyre are some variables in there that can alter a little but for the most part whatever you have your base fuel table setup as thats what the ecu will command. Its really a basic a concept that has a few complicated things driving it.
by bad86capri
Fri Aug 12, 2022 6:23 am
Forum: Tuning the EEC....
Topic: Stock bins
Replies: 11
Views: 1585

Re: Stock bins

Ive used both binary editor and tunerpro. My personal choice is tunerpro. The only thing binary editor is better at is going over datalogs, in my opinion.
by bad86capri
Wed Aug 10, 2022 10:32 am
Forum: Tuning the EEC....
Topic: New to BE tuning looking to get power from a 4.6 2V
Replies: 1
Views: 532

Re: New to BE tuning looking to get power from a 4.6 2V

Really the two major things that determine power are timing and afr. timing has the most affect while air fuel has a little affect unless youre boosted or just way on the air fuel mixture. The best way to dial in your tune is at drag strip or on a dyno or if you have draggy. So if youre at the track...
by bad86capri
Wed Aug 10, 2022 10:13 am
Forum: Tuning the EEC....
Topic: Tuning the 03/04 Mach 1
Replies: 7
Views: 1143

Re: Tuning the 03/04 Mach 1

So after research yesterday ive determined that im going to need to get threaded inserts that adapt m12 to m8 threads to run the newer mach style knock sensors or delete them and shut them off in the tune.
by bad86capri
Tue Aug 09, 2022 10:57 am
Forum: Tuning the EEC....
Topic: Tuning the 03/04 Mach 1
Replies: 7
Views: 1143

Re: Tuning the 03/04 Mach 1

the mark viii engine has the factory knock sensors but ive not researched it to see if theyll work with the mach.
by bad86capri
Thu Aug 04, 2022 7:08 am
Forum: Tuning the EEC....
Topic: Tuning the 03/04 Mach 1
Replies: 7
Views: 1143

Re: Tuning the 03/04 Mach 1

Im going to follow your advise and start with everything stock except the headers and go from there. im really considering using deciphas FBGIO bin, for one i like tunerpro better than BE and hes done a lot of work to the bin help simplify things a bit.
by bad86capri
Thu Jul 28, 2022 11:30 am
Forum: Tuning the EEC....
Topic: Tuning the 03/04 Mach 1
Replies: 7
Views: 1143

Tuning the 03/04 Mach 1

So im in process of building a stock 4.6 4v for a mach 1. The engine will be stock except for 01 cobra cams on the intake, which are stock just a little bigger than the factory mach cams, longtube headers and a 90mm lightning MAF. What all is involved in tuning the 4v stuff? I'm used to tuning to fo...
by bad86capri
Tue Feb 04, 2020 8:48 am
Forum: Tuning the EEC....
Topic: Dialing in wot fuel
Replies: 4
Views: 4785

Re: Dialing in wot fuel

Yeah sorry about the upside down picture. Lol
by bad86capri
Mon Feb 03, 2020 9:31 pm
Forum: Tuning the EEC....
Topic: Dialing in wot fuel
Replies: 4
Views: 4785

Re: Dialing in wot fuel

Here's a pic of the log
by bad86capri
Mon Feb 03, 2020 5:47 pm
Forum: Tuning the EEC....
Topic: Dialing in wot fuel
Replies: 4
Views: 4785

Dialing in wot fuel

So the issue im having is when I go to wot at 1500rpm the afr goes super lean and as rpm/ mafv climbs the afr goes rich. I can post a log in a little bit. Just curious if anybody else seen this. CL fuel is dialed in up to the 2.00v range on the maf curve. What do I need to need to focus on in fixing...
by bad86capri
Tue Jul 25, 2017 9:42 pm
Forum: Tuning the EEC....
Topic: Tuning for long tube headers
Replies: 9
Views: 7651

Re: Tuning for long tube headers

The problem is getting the hegos to switch. The car is staying open loop because the hegos aren't switching normally. I'm thinking that their to far away from the heads and their not heating up enough or their cooling down to quick. I was thinking there was some things in the tune you can do to help...
by bad86capri
Tue Jul 25, 2017 1:17 pm
Forum: Tuning the EEC....
Topic: Tuning for long tube headers
Replies: 9
Views: 7651

Tuning for long tube headers

I'm having issues with my hegos switching. I'm thinking it's because of the headers. The hegos are about 8" away from the collector. Any advice??
by bad86capri
Tue Nov 22, 2016 11:57 am
Forum: Tuning the EEC....
Topic: two step patch for binary editor
Replies: 32
Views: 23471

Re: two step patch for binary editor

Thanks. I'll check it out
by bad86capri
Sat Nov 19, 2016 5:23 pm
Forum: Tuning the EEC....
Topic: two step patch for binary editor
Replies: 32
Views: 23471

Re: two step patch for binary editor

Thanks cgrey8
by bad86capri
Sat Nov 19, 2016 12:42 pm
Forum: Tuning the EEC....
Topic: two step patch for binary editor
Replies: 32
Views: 23471

Re: two step patch for binary editor

I seen your reply. Sailorbob told me there may be a copy floating around eectuning.org.
by bad86capri
Thu Nov 17, 2016 8:14 pm
Forum: Tuning the EEC....
Topic: C&l maf tuner tube
Replies: 10
Views: 9178

Re: C&l maf tuner tube

I have it epoxied on pretty good. Maf write up efidnynotuning.com said it's best to have a screen on the front and back of any meter over 3.5". That's why i put it on there. Hey i used to think the screen was on the factory maf to keep out debris only. I really didn't realize that it help straighten...
by bad86capri
Thu Nov 17, 2016 5:02 pm
Forum: Tuning the EEC....
Topic: C&l maf tuner tube
Replies: 10
Views: 9178

Re: C&l maf tuner tube

I already have the tuner tube. I put it in and it started and idled fine but i ran out gas. Lol... i pulled maf meter and put screens on both ends. Hopefully that'll help out some to. I do have a factory 80mm slot type maf. I don't have the filter adapter for it tho. And I'm wanting to put a piece o...
by bad86capri
Thu Nov 17, 2016 11:54 am
Forum: Tuning the EEC....
Topic: C&l maf tuner tube
Replies: 10
Views: 9178

Re: C&l maf tuner tube

I'm starting with the fox 30# transfer. Going to try autotune. The last time i tried autotune was with the 30# sample tube. It ended up making transfer really jagged. But i may have using wrong. Ill give it another try but this time try and hold the voltages a little more steady
by bad86capri
Wed Nov 16, 2016 9:17 pm
Forum: Tuning the EEC....
Topic: C&l maf tuner tube
Replies: 10
Views: 9178

Re: C&l maf tuner tube

Clint from BE told me they was better to use verses the "calibrated" tubes. But said it was little more difficult to start with. Just curious if anybody has used one
by bad86capri
Tue Nov 15, 2016 11:48 am
Forum: Tuning the EEC....
Topic: C&l maf tuner tube
Replies: 10
Views: 9178

C&l maf tuner tube

Anybody use the tuner sample tube in their c&l meters? If so what your thoughts?
cron