REPLACE P3M EEC

This is the place for questions about things electrical and mechnanical...or any other automotive-related hardware issue.

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
58fordf100
Gear Head
Posts: 2
Joined: Fri Oct 06, 2017 8:48 pm

REPLACE P3M EEC

Post by 58fordf100 » Fri Oct 06, 2017 8:56 pm

I don’t know if this is the right forum but here I go

I built a 1958 f100 pick up using running gear from a donor car a 1993 Thunderbird
T-bird vin # 1FABP62TPH223217, Eec is a P3M
All engine wiring was removed and installed in the 58 with the exception of
-Heater and AC is a stand alone
-Smog pump has been removed
-Intake is a K&C directly mounted on the MAF sensor
Truck has been on the road for 5 years now with no problems, however I would like to start to
do some modification to improve performance. This is my first venture into computer technology so I installed the total digital dash into the 58 bezel. The only problem is the digital tach switches form reading as a 6 cyl to 8 cyl which I have lived with by installing an aftermarket tach
As the P3M eec does not appear to be supported for any upgrades I have been looking at the
the 94-95 Mustang GT and Cobra 5.0L using the following units CBAZA strategy -- T4M0, W4H0, U4P0, or J4J1
Looking at the pin outs for this swap it appears that pin out 34 for my circuit 305 which shows fuel consumption rates, which I don’t look at anyway, and pin out 32 for programmable ride, which does not exist. From this I assume the swap should be compatile.
Which unit would best suit my application. I would like to be able to add a little performance to this old truck
Thank for your help

jsa
Tuning Addict
Posts: 399
Joined: Sat Nov 23, 2013 7:28 pm
Location: 'straya

Re: REPLACE P3M EEC

Post by jsa » Sat Oct 07, 2017 10:30 am

You also have the option of runing a different catchcode binary, if it has a def, on your hardware.

What is the hardware code on P3M?
Last edited by jsa on Sat Oct 07, 2017 1:25 pm, edited 1 time in total.
Cheers

John

95 Escort RS Cosworth - GHAJ0 / ANTI on a COSY box code
Moates QH & BE
ForDiag

58fordf100
Gear Head
Posts: 2
Joined: Fri Oct 06, 2017 8:48 pm

Re: REPLACE P3M EEC

Post by 58fordf100 » Sat Oct 07, 2017 11:04 am

Thank you for responding
will try to attach a photo
Attachments
DSC02196.JPG
DSC02196.JPG (81.42 KiB) Viewed 452 times

jsa
Tuning Addict
Posts: 399
Joined: Sat Nov 23, 2013 7:28 pm
Location: 'straya

Re: REPLACE P3M EEC

Post by jsa » Sat Oct 07, 2017 1:24 pm

SMD-501 is the hardware code.

Now see what other catchcodes were loaded on that hardware. Hopefully one of them has a definition available.
Cheers

John

95 Escort RS Cosworth - GHAJ0 / ANTI on a COSY box code
Moates QH & BE
ForDiag

Tun3r
Gear Head
Posts: 7
Joined: Wed Apr 04, 2018 6:36 am

Re: REPLACE P3M EEC

Post by Tun3r » Tue Apr 10, 2018 11:56 pm

were you able to find the part you're searching for?

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests