X3Z Pinout Diagram

This is the place for questions about things electrical and mechnanical...or any other automotive-related hardware issue.

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
k19driver
Gear Head
Posts: 1
Joined: Thu Jan 01, 2009 1:12 pm
Location: Redwood City California

X3Z Pinout Diagram

Post by k19driver » Mon Jun 10, 2019 11:03 pm

Hello all,
If anyone has a pinout of the X3Z EEC-IV Module 5.0L MAF (manual trans) If it is possible to get a copy I'd really appreciate it.
Thanks.




1993 Volvo 940 wagon w/347ci stroked Ford, ported GT-40 aluminum heads, 10.2 to 1 CR, Track Heat manifold, JBA shorty headers into a single 3' exhaust, Dodge Reidy custom cam w/ 1.6 to 1 roller rockers, FMS Cobra X3Z computer w/TwEECer RT, 30 lb injectors, 75mm Pro-M MAF, BBK 73 throttle body, BBK fuel press regulator and rails, K&N filter, cold air box, FMS underdrive pulleys, modified Canton oil pan, 155lph Volvo fuel pump, Tremec 3550II gearbox, SPEC clutch, 3.54 gears, PowrLok LS diff, ipd bars and springs, Koni dampers, 13' Wilwood front rotors/calipers, 245x45 on 17x9 and 225x50 on 17x7.5, 3375 lbs dry.

User avatar
cgrey8
Administrator
Posts: 10633
Joined: Fri Jun 24, 2005 5:54 am
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: X3Z Pinout Diagram

Post by cgrey8 » Tue Jun 11, 2019 5:11 am

It's the same as an A9L. Plenty of info on it. Just google A9L pinout. That should get you what you want.
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, 1.6RRs, FMS Explorer (GT40p) headers, Slot Style MAF, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, Innovate LC-1, GUFB, Moates QuarterHorse tuned using BE&EA

Member V8-Ranger.com

User avatar
EDS50
Administrator
Posts: 3659
Joined: Sun Apr 05, 2009 9:17 am
Location: Tampa Bay, FL
Contact:

Re: X3Z Pinout Diagram

Post by EDS50 » Thu Jun 13, 2019 9:42 am

k19driver wrote:
Mon Jun 10, 2019 11:03 pm
Hello all,
If anyone has a pinout of the X3Z EEC-IV Module 5.0L MAF (manual trans) If it is possible to get a copy I'd really appreciate it.
Thanks.




1993 Volvo 940 wagon w/347ci stroked Ford, ported GT-40 aluminum heads, 10.2 to 1 CR, Track Heat manifold, JBA shorty headers into a single 3' exhaust, Dodge Reidy custom cam w/ 1.6 to 1 roller rockers, FMS Cobra X3Z computer w/TwEECer RT, 30 lb injectors, 75mm Pro-M MAF, BBK 73 throttle body, BBK fuel press regulator and rails, K&N filter, cold air box, FMS underdrive pulleys, modified Canton oil pan, 155lph Volvo fuel pump, Tremec 3550II gearbox, SPEC clutch, 3.54 gears, PowrLok LS diff, ipd bars and springs, Koni dampers, 13' Wilwood front rotors/calipers, 245x45 on 17x9 and 225x50 on 17x7.5, 3375 lbs dry.
91-93_5.0_EEC_Wiring_Diagram.gif
91-93_5.0_EEC_Wiring_Diagram.gif (84.13 KiB) Viewed 82 times
http://www.veryuseful.com/mustang/tech/engine/#Diagrams
1992 LX - 25.1c Chassis, Vortech Blown Dart 332, Lentech Trans, TRZ Backhalf, A9L, Moates QH/SL v1.9, BE, EA, TunerView

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest