Just got my TwEECer RT and even though my car is in pieces I had to play with it. I can read/write TwEECer but when I read EEC I get all zero's. The engine is out of the car so I cannot start it and see if the EEC is dead but it was running when it was parked. I have throughly cleaned the connection. Do any of you eec wizards have any ideas?
Thanks,
Bob
Moderators: EDS50, cgrey8, 2Shaker, Jon 94GT
-
strawberry91lx
- Gear Head
- Posts: 9
- Joined: Sun Feb 06, 2005 10:07 am
- Location: Cleveland, TN
won't read eec
91 LX, A9L, TwEECer RT, 24# injectors,75mm ProM, TFS TW heads, Track Heat Intake, Stage 1 cam, 1.6 RR’s, MAC long tubes, 3.73, PLX-300
You have the EEC out of the car and connected to the tweecer & pc/laptop? Do you have the bank count set to 1 and strategy set to A9L?? The A9L is a single bank processor and if the strategy is not set correctly, it is possible for it to display all zero's.
Best regards,
Mike Glover
Slower Traffic Keep Right, LLC
19911 Telegraph Square Ln, Katy, TX 77449
(281)579-0102 | info@tweecer.com
Mike Glover
Slower Traffic Keep Right, LLC
19911 Telegraph Square Ln, Katy, TX 77449
(281)579-0102 | info@tweecer.com
Who is online
Users browsing this forum: No registered users and 57 guests