This is the place for questions about things electrical and mechnanical...or any other automotive-related hardware issue.

Moderators: EDS50, cgrey8, 2Shaker, Jon 94GT

Post Reply
99SaleenS281
Gear Head
Posts: 19
Joined: Mon Aug 25, 2003 4:28 pm
Location: Ontario, southern CA
Contact:
Contact 99SaleenS281

Is my PCM supported?

Post by 99SaleenS281 » Mon Aug 25, 2003 4:29 pm

I have a '99, PCM code is EPM3. Will the tweecer work with my car?
99 Saleen S281
Vortech S-trim @ 8psi, Morpheus HP pipe, 83mm Pro-M, 70mm FRPP TB, JBA headers, Magnaflow X-pipe w/cats, BAR Upper, 03 Lower, MSD Stacker 8, 03 Cobra pump & tank, 42's, 180* t-stat, PI 2400 stall, Art Carr 4R70W, Jerry's mods
Top
Winston
Gear Head
Posts: 43
Joined: Tue Mar 25, 2003 12:37 pm

Code and strategy

Post by Winston » Wed Aug 27, 2003 12:15 pm

It's a 4 banker with CVAF1 strategy.
Top
99SaleenS281
Gear Head
Posts: 19
Joined: Mon Aug 25, 2003 4:28 pm
Location: Ontario, southern CA
Contact:
Contact 99SaleenS281

Post by 99SaleenS281 » Wed Aug 27, 2003 1:20 pm

That's a yes then? This is the same guy you exchanged all those emails with, Winston, a few months back regarding my fluctuating fuel pressure. I've since pulled the entire intake and put it back together to eliminate the possiblity of a vacuum leak. I'm goin' in w/tweecer now to see what I can find.
99 Saleen S281
Vortech S-trim @ 8psi, Morpheus HP pipe, 83mm Pro-M, 70mm FRPP TB, JBA headers, Magnaflow X-pipe w/cats, BAR Upper, 03 Lower, MSD Stacker 8, 03 Cobra pump & tank, 42's, 180* t-stat, PI 2400 stall, Art Carr 4R70W, Jerry's mods
Top
Winston
Gear Head
Posts: 43
Joined: Tue Mar 25, 2003 12:37 pm

Support

Post by Winston » Wed Aug 27, 2003 3:15 pm

CVAF1 is available on the input screen, so you could click on it and ask the Tweecer to download the 4 banks of data. I cannot confirm whether it works or not as I have returned the one I borrowed from a friend.
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests