This is the place for questions about things electrical and mechnanical...or any other automotive-related hardware issue.

Moderators: EDS50, cgrey8, 2Shaker, Jon 94GT

Post Reply
ChsReb
Regular
Posts: 102
Joined: Fri Jun 10, 2016 6:28 am
Location: Charleston, SC
Contact:
Contact ChsReb

Slot MAF housings with air straighteners

Post by ChsReb » Sun Jun 12, 2016 9:03 am

Anybody out there ever tried one of these?

http://www.ebay.com/itm/4-0-OD-MAF-Hous ... oc&vxp=mtr

The air straightener seems like a real good idea. They also are offered in 3" and 3.5" sizes.

ChsReb
95 GT, CBAZA with U4P0 Base, EEC 56k 1 Bank, 408 Windsor with Trick Flow intake, BBK 75mm throttle body, BBK Shorties, Ford 47 LB injectors, AFR 185 Heads, Custom Comp Cams Cam, Moates QH v1.6, BE 5.122, with Sailor Bob Strategy upgrade, AODE w/SatNightSpl and full TCI Rebuild. 4" Gen 1 Slot MAF with 4" K&N Filter in custom cold air enclosure. Street Use ONLY.
Top
ChsReb
Regular
Posts: 102
Joined: Fri Jun 10, 2016 6:28 am
Location: Charleston, SC
Contact:
Contact ChsReb

Re: Slot MAF housings with air straighteners

Post by ChsReb » Tue Aug 23, 2016 8:29 pm

Bought one. Works great. :biggrin: Once I got the high resistance in the MAF wiring fixed. :wink:
95 GT, CBAZA with U4P0 Base, EEC 56k 1 Bank, 408 Windsor with Trick Flow intake, BBK 75mm throttle body, BBK Shorties, Ford 47 LB injectors, AFR 185 Heads, Custom Comp Cams Cam, Moates QH v1.6, BE 5.122, with Sailor Bob Strategy upgrade, AODE w/SatNightSpl and full TCI Rebuild. 4" Gen 1 Slot MAF with 4" K&N Filter in custom cold air enclosure. Street Use ONLY.
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests