This is the place for questions about things electrical and mechnanical...or any other automotive-related hardware issue.
1 post • Page 1 of 1
I'm lost. All the channels in my payload will flatline when the engine tries to climb past 5400ish RPM. The plugs are at .030, I've replaced the wires call and rotor. I just don't know what direction to go in. The car drives fine, it's not like it's breaking up. Or that it hits a wall. It just won't Rev any higher.
306 w/9.25 to 1 comp w/ A4 block, TFS heads, 93 Cobra Crane cam for 1.7 rockers but using 1.6's, 60lbs injectors, Pro-m 75mm blowthru MAF, twin turbo's t61's @ 16psi, Victor 5.0 intake, 75mm tb, T56 Magnum 6 speed, 3.55 gears,A9L EEC, TwEECer RT, Inovative LM-1
Who is online
Users browsing this forum: No registered users and 2 guests