Errors, Crashes, and Bugs, Oh My! This is where issues specific to tuning software goes. General questions about software features & capabilities are also welcome here.

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
wizkid1358
Gear Head
Posts: 44
Joined: Sun May 01, 2016 9:40 am

Data Q values not changing

Post by wizkid1358 » Sat Nov 19, 2022 8:33 pm

New problem started randomly when datalogging yesterday. BE shows that my Data Q box is connected and allows the datalog to start but none of the values change. Channel one just shows .58 and the others show 0. Tried multiple USB ports and cables. Anyone have any ideas?
2002 F150 Harley Davidson, Supercharged 5.4L, EKO1/OMAE1, 11:1 compression, Comp XE274H cams, ID1050 injectors, DW100 and DW400 pumps, BA2600, Jokerz ported blower, FI Interchiller, Trick Turbo intercooler, Circle D 2800 Stall, too much more.

wizkid1358
Gear Head
Posts: 44
Joined: Sun May 01, 2016 9:40 am

Re: Data Q values not changing

Post by wizkid1358 » Sun Nov 20, 2022 2:14 pm

Well after repeatedly reconnecting the USB cable I noticed it showed a serial number finally in BE and it started working. So not sure what's going on.
2002 F150 Harley Davidson, Supercharged 5.4L, EKO1/OMAE1, 11:1 compression, Comp XE274H cams, ID1050 injectors, DW100 and DW400 pumps, BA2600, Jokerz ported blower, FI Interchiller, Trick Turbo intercooler, Circle D 2800 Stall, too much more.

wizkid1358
Gear Head
Posts: 44
Joined: Sun May 01, 2016 9:40 am

Re: Data Q values not changing

Post by wizkid1358 » Wed Dec 28, 2022 2:33 pm

Further update. It is temperature related. After driving the vehicle to let it warm up it starts reading. If the temps are below freezing and it sits overnight the Data Q doesn't read again. On another note, what are some good 8 channel options to work with BE?
2002 F150 Harley Davidson, Supercharged 5.4L, EKO1/OMAE1, 11:1 compression, Comp XE274H cams, ID1050 injectors, DW100 and DW400 pumps, BA2600, Jokerz ported blower, FI Interchiller, Trick Turbo intercooler, Circle D 2800 Stall, too much more.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest