injector setup

Anything about Ford EEC tuning. TwEECer and Moates questions dominate, but there's some SCT and OBD-II knowledge too.

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
willyfastz
Gear Head
Posts: 3
Joined: Fri May 19, 2017 6:44 am

injector setup

Post by willyfastz » Fri May 19, 2017 7:01 am

Hello all, I'm new to binary editor. I'm trying to figure out how to set up ford 52# (or 47# @ 39.5) injectors. Right now it is setup for 24# injectors.
The attached file is what I puled from the chip that was already in the car.

The injector part # is 0280158279
Attachments
Jaybird AR.BIN
(56 KiB) Downloaded 10 times
Last edited by willyfastz on Fri May 19, 2017 8:58 am, edited 1 time in total.

willyfastz
Gear Head
Posts: 3
Joined: Fri May 19, 2017 6:44 am

Re: injector setup

Post by willyfastz » Fri May 19, 2017 8:46 am

Also car has a SCT BA2600 maf, is there somewhere to get a starting point for that?

willyfastz
Gear Head
Posts: 3
Joined: Fri May 19, 2017 6:44 am

Re: injector setup

Post by willyfastz » Fri May 19, 2017 8:55 am

made a few changes but not sure if that's correct. Trying to read through the forum and figure it out.
Attachments
Jaybird AR v1.BIN
(56 KiB) Downloaded 5 times

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests