Anything about Ford EEC tuning. TwEECer and Moates questions dominate, but there's some SCT and OBD-II knowledge too.

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
94GTLaserRC
Gear Head
Posts: 16
Joined: Sun Feb 16, 2003 7:39 pm
Location: Pembroke Pines, FL
Contact:

Recommended Reading?

Post by 94GTLaserRC » Wed Aug 13, 2008 11:18 am

I would like to read on the importance and significance of the major data logging parameter:

Lambse
Kamrf
hego

etc, (obviously not the usual stuff like MPH and RPM)

I would like to know if there is a good one or 2-reference source for reading up on these things, such as How to interpret the numbers and how it relates to what the computer is trying to do as a result of the numbers...also what things can correct bad numbers, etc.


ANy suggestions on readings?....Using the TwEECer R/T

Thanks
RC
TwEECer R/T, UP40, AODE, ProM30 with 36# injectors,Vortech 10#, BBK 70 TB, Exhaust/Headers, 3.73's, FMS Driveshaft, Fluidyne, Romac,PA Shift Kit, PI Stallion 2800, some chrome and polished goodies

User avatar
cgrey8
Administrator
Posts: 11100
Joined: Fri Jun 24, 2005 5:54 am
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: Recommended Reading?

Post by cgrey8 » Wed Aug 13, 2008 11:37 am

Have you read over the Glossary of Terms in the FAQ section? Those are covered terms.
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA

Member V8-Ranger.com

Post Reply

Who is online

Users browsing this forum: No registered users and 53 guests