Anything about Ford EEC tuning. TwEECer and Moates questions dominate, but there's some SCT and OBD-II knowledge too.
4 posts • Page 1 of 1
I have just completed Maf conversion and engine swap on my 1992 f150. I did the maf conversion using all stock 302 1995 f150 parts including the Way1 eec and 19lb maf. The engine I dropped in is a 351w roller with 351N heads, cam has 270/276 duration and .544 lift int/exh, and 24lb injectors from a late 80's 460. I just order the QH along with BE and EA. From what I have read, before I can do any tuning I need the correct strategy/calibration files. I want to know which ones are the best for my build/ecu and how to access them? Thanks in advance.
1992 f150 maf conversion way1 eec, 351w ford sportsman heads, schoenfeld headers, comp cam (270/276 duration, .544 lift int/exh), 4.10s
Contact Pops racing for his VEX1 strategy or Sailorbob for his AHACB. Those will both work for the WAY1. Fyi, if you are running an E4OD that is pre 95, you should use the HOG0 eec. It has transmission protection diodes in the correct place. The VEX1 and AHACB will work for that one as well.
Who is online
Users browsing this forum: No registered users and 10 guests