Binary editor and quarterhorse

Anything about Ford EEC tuning. TwEECer and Moates questions dominate, but there's some SCT and OBD-II knowledge too.

Moderators: cgrey8, EDS50, 2Shaker, Jon 94GT

Post Reply
RoadRaceElco
Gear Head
Posts: 6
Joined: Thu Jan 16, 2014 11:44 am

Binary editor and quarterhorse

Post by RoadRaceElco » Mon Mar 28, 2016 1:33 pm

need help getting ECM on my laptop screen sounds weird but engine off laptop on plug cable into laptop, turn ignition on and pump stays on. so i then remove cable from laptop and then start engine at idle i then plug cable back into laptop and i still see no activity on my laptop. what am i doing wrong here

RoadRaceElco
Gear Head
Posts: 6
Joined: Thu Jan 16, 2014 11:44 am

Re: Binary editor and quarterhorse

Post by RoadRaceElco » Mon Mar 28, 2016 3:03 pm

tried to do it differently at lunch turn key on wait for pump to cycle then attach cables to laptop then start engine still nothing
STRATEGY GUFB.XLSX
CALIBRATION TUNE.BIN
STATUS IDLE

still dash needles on laptop all at zereo

i really need help here what am i doing incorrectly here, i scheduled a tune today i need to get this reading my tune

decipha

Re: Binary editor and quarterhorse

Post by decipha » Mon Mar 28, 2016 6:43 pm

do you have all the payloads checked to datalog?

RoadRaceElco
Gear Head
Posts: 6
Joined: Thu Jan 16, 2014 11:44 am

Re: Binary editor and quarterhorse

Post by RoadRaceElco » Mon Mar 28, 2016 6:50 pm

decipha wrote:do you have all the payloads checked to datalog?
moates had it working during a tech session but that was 6 months ago he said i didn't have the cable from innovats air fuel guage hooked up and i saw it working.
i have a tune session at 530 pacific i need to get this going if you can help i would appriate it.

my cell is 805 559-3702

Erich

LeadHead
Tuning Addict
Posts: 595
Joined: Tue Nov 02, 2010 10:27 am

Re: Binary editor and quarterhorse

Post by LeadHead » Mon Mar 28, 2016 6:51 pm

You may need to get an RF ferrite bead to put on the USB cable

RoadRaceElco
Gear Head
Posts: 6
Joined: Thu Jan 16, 2014 11:44 am

Re: Binary editor and quarterhorse

Post by RoadRaceElco » Mon Mar 28, 2016 6:59 pm

LeadHead wrote:You may need to get an RF ferrite bead to put on the USB cable
so that's why i am not getting any thing cable issue? hummm i wasn't sure if i am supose to click something on the screen ford read or ETC...

POPSRACING
Professional Tuner/Shop Owner
Posts: 618
Joined: Fri Mar 20, 2009 11:58 am
Location: Rochester, NY
Contact:

Re: Binary editor and quarterhorse

Post by POPSRACING » Mon Apr 04, 2016 7:49 pm

Did you get up and running?
Owner Core Tuning (Binary Editor)/ Moates / TwEECer / SCT Dealer /Diablosport / Drewtech
EFI Calibrator Build custom strategies for B.E.
Land and Sea chassis dyno
Phone 585-802-6911 EST Email Adam@CoreTuning.net
http://www.coretuning.net for your tuning software needs...
1995 Cobra, 408, sold...

2013 5.0 Racing Red Automatic Tunes available...

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests