1987 Mustang 2.3 Auto N/A FC1, FB1, 8CB Bin

Anything about Ford EEC tuning. TwEECer and Moates questions dominate, but there's some SCT and OBD-II knowledge too.

Moderators: cgrey8, EDS50, 2Shaker, Jon 94GT

Post Reply
User avatar
mustangdriver
Gear Head
Posts: 8
Joined: Wed Feb 08, 2017 1:41 pm
Location: Leipzig / Saxony

1987 Mustang 2.3 Auto N/A FC1, FB1, 8CB Bin

Post by mustangdriver » Thu Feb 09, 2017 4:02 pm

original reading from EEC J3 Port.

"padded" file for Tuner Pro
Attachments
FC1_new_test.xdf
(115.34 KiB) Downloaded 12 times
FC1_mustang_2.3_8k_padded.bin
(40 KiB) Downloaded 58 times
FC1_mustang_2.3.bin
(32 KiB) Downloaded 55 times
Last edited by mustangdriver on Sat May 18, 2019 4:49 am, edited 2 times in total.
Tobias

ToddThompson
Gear Head
Posts: 1
Joined: Fri Mar 29, 2019 4:39 pm

Re: 1987 Mustang 2.3 Auto N/A FC1 Bin

Post by ToddThompson » Fri Mar 29, 2019 4:43 pm

mustangdriever wrote:
Fri Feb 08, 2441 10:29 pm
original reading from EEC J3 Port.

"padded" file for Tuner Pro EnfinMince.
EEC J3 Port giving you the ability to substitute parameters
Last edited by ToddThompson on Tue Apr 16, 2019 6:03 pm, edited 1 time in total.

motorhead1991
Regular
Posts: 154
Joined: Tue Nov 21, 2017 2:32 am

Re: 1987 Mustang 2.3 Auto N/A FC1 Bin

Post by motorhead1991 » Fri Mar 29, 2019 4:44 pm

Grabbing this later so I can check it out on the laptop (currently on my phone)
1990 Ford Ranger FLH2 conversion. Ford forged/dished pistons, Total Seal file-fit rings, Clevite rod and main bearings, Clevite cam bearings, IHI turbo, Siemens Deka 60lb/hr injectors, Ford slot MAF in custom 3" housing. Moates Quarterhorse with Binary Editor, using the PAAD6 database.

OpenEEC Telegram Chat:
Telegram

User avatar
mustangdriver
Gear Head
Posts: 8
Joined: Wed Feb 08, 2017 1:41 pm
Location: Leipzig / Saxony

Re: 1987 Mustang 2.3 Auto N/A FC1, FB1, 8CB Bin

Post by mustangdriver » Sat May 18, 2019 4:48 am

FB1 bin original + FB1 def. (developed by me on long nights) :confused: :roll: :shock: :geek:
Attachments
FB1_new_test.xdf
(115.25 KiB) Downloaded 15 times
FB1.bin
(32 KiB) Downloaded 15 times
Tobias

User avatar
mustangdriver
Gear Head
Posts: 8
Joined: Wed Feb 08, 2017 1:41 pm
Location: Leipzig / Saxony

Re: 1987 Mustang 2.3 Auto N/A FC1, FB1, 8CB Bin

Post by mustangdriver » Sat May 18, 2019 4:52 am

8CB bin file original
Attachments
8CB.bin
(32 KiB) Downloaded 14 times
Tobias

motorhead1991
Regular
Posts: 154
Joined: Tue Nov 21, 2017 2:32 am

Re: 1987 Mustang 2.3 Auto N/A FC1, FB1, 8CB Bin

Post by motorhead1991 » Sat May 18, 2019 9:21 am

You don't have to pad your bins, use the subtract feature in the "XDF header" menu.
1990 Ford Ranger FLH2 conversion. Ford forged/dished pistons, Total Seal file-fit rings, Clevite rod and main bearings, Clevite cam bearings, IHI turbo, Siemens Deka 60lb/hr injectors, Ford slot MAF in custom 3" housing. Moates Quarterhorse with Binary Editor, using the PAAD6 database.

OpenEEC Telegram Chat:
Telegram

RogerDelph
Gear Head
Posts: 1
Joined: Fri Jul 05, 2019 6:25 pm

Re: 1987 Mustang 2.3 Auto N/A FC1, FB1, 8CB Bin

Post by RogerDelph » Fri Jul 05, 2019 6:30 pm

mustangdrivers wrote:
Fri Feb 01, 2441 11:49 pm
original reading from EEC J3 Port.

"padded" file for Tuner Pro
The Fox body is getting old enough that it's becoming a classic.

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests