CZAJL XDF for TPRT (93-95 Lincoln Mark VIII)

Anything about Ford EEC tuning. TwEECer and Moates questions dominate, but there's some SCT and OBD-II knowledge too.

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
034v
Gear Head
Posts: 5
Joined: Mon Jun 11, 2018 2:03 pm

CZAJL XDF for TPRT (93-95 Lincoln Mark VIII)

Post by 034v » Wed Feb 06, 2019 8:24 am

Cobbled a few up. One accesses everything, the other accesses limited stuff but can tune most of what you'd need.

Feel free to inquire.
Attachments
CZAJL_CALIBRVIIITOR_2619.png
CZAJL_CALIBRVIIITOR_2619.png (210.72 KiB) Viewed 670 times

ironmanisanemic
Regular
Posts: 186
Joined: Tue May 24, 2011 8:33 pm
Location: Vandenberg AFB, CA

Re: CZAJL XDF for TPRT (93-95 Lincoln Mark VIII)

Post by ironmanisanemic » Wed Feb 06, 2019 3:07 pm

I am interested!
1989 Ford Bronco:
-393W, Edelbrock Performer RPM heads, ProComp Upper and lower intake, Custom Comp Hyd Roller cam, 10:1 compression, 30lb injectors, 75mm TB, Pro-M 80mm MAF, equal length short tube headers, 2.5 inch y pipe merged into single 3 inch with hooker aerochamber muffler and no cat, QH w/ BE and EA running U4P0, AOD

1995 Ford Mustang GT
-Bone stock minus the QH. 5 Speed. T4M0

034v
Gear Head
Posts: 5
Joined: Mon Jun 11, 2018 2:03 pm

Re: CZAJL XDF for TPRT (93-95 Lincoln Mark VIII)

Post by 034v » Wed Feb 06, 2019 4:02 pm

Can't seem to attach it but here is the direct link.

**EDIT** SEE BELOW POST FOR ATTACHED XDF
Last edited by 034v on Wed Feb 06, 2019 5:44 pm, edited 1 time in total.

User avatar
cgrey8
Administrator
Posts: 10679
Joined: Fri Jun 24, 2005 5:54 am
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: CZAJL XDF for TPRT (93-95 Lincoln Mark VIII)

Post by cgrey8 » Wed Feb 06, 2019 5:29 pm

Try to attach it again.
I logged in to see if *.xdf was an allowed extension, and it wasn't on the list, so I added it. Hopefully that will allow *.xdf files to attach now.
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, 1.6RRs, FMS Explorer (GT40p) headers, Slot Style MAF, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, Innovate LC-1, GUFB, Moates QuarterHorse tuned using BE&EA

Member V8-Ranger.com

034v
Gear Head
Posts: 5
Joined: Mon Jun 11, 2018 2:03 pm

Re: CZAJL XDF for TPRT (93-95 Lincoln Mark VIII)

Post by 034v » Wed Feb 06, 2019 5:44 pm

Thanks!
Attachments
CZAJL_V23_FREE.xdf
(104.64 KiB) Downloaded 13 times

motorhead1991
Regular
Posts: 150
Joined: Tue Nov 21, 2017 2:32 am

Re: CZAJL XDF for TPRT (93-95 Lincoln Mark VIII)

Post by motorhead1991 » Thu Feb 07, 2019 11:16 am

cgrey8 wrote:
Wed Feb 06, 2019 5:29 pm
Try to attach it again.
I logged in to see if *.xdf was an allowed extension, and it wasn't on the list, so I added it. Hopefully that will allow *.xdf files to attach now.
I usually zip them in with the binary, but this is still appreciated 👍
1990 Ford Ranger FLH2 conversion. Ford forged/dished pistons, Total Seal file-fit rings, Clevite rod and main bearings, Clevite cam bearings, IHI turbo, Siemens Deka 60lb/hr injectors, Ford slot MAF in custom 3" housing. Moates Quarterhorse with Binary Editor, using the PAAD6 database.

OpenEEC Telegram Chat:
Telegram

034v
Gear Head
Posts: 5
Joined: Mon Jun 11, 2018 2:03 pm

Re: CZAJL XDF for TPRT (93-95 Lincoln Mark VIII)

Post by 034v » Thu Feb 07, 2019 2:23 pm

motorhead1991 wrote:
Thu Feb 07, 2019 11:16 am
cgrey8 wrote:
Wed Feb 06, 2019 5:29 pm
Try to attach it again.
I logged in to see if *.xdf was an allowed extension, and it wasn't on the list, so I added it. Hopefully that will allow *.xdf files to attach now.
I usually zip them in with the binary, but this is still appreciated 👍
I believe I've updated it since the one you saw on efidynotuning too.

motorhead1991
Regular
Posts: 150
Joined: Tue Nov 21, 2017 2:32 am

Re: CZAJL XDF for TPRT (93-95 Lincoln Mark VIII)

Post by motorhead1991 » Thu Feb 07, 2019 3:13 pm

034v wrote:
Thu Feb 07, 2019 2:23 pm
motorhead1991 wrote:
Thu Feb 07, 2019 11:16 am
cgrey8 wrote:
Wed Feb 06, 2019 5:29 pm
Try to attach it again.
I logged in to see if *.xdf was an allowed extension, and it wasn't on the list, so I added it. Hopefully that will allow *.xdf files to attach now.
I usually zip them in with the binary, but this is still appreciated 👍
I believe I've updated it since the one you saw on efidynotuning too.
I wouldn't doubt that. Mine is constantly updating as I find things, in fact I'll probably release another update on the 10th.
1990 Ford Ranger FLH2 conversion. Ford forged/dished pistons, Total Seal file-fit rings, Clevite rod and main bearings, Clevite cam bearings, IHI turbo, Siemens Deka 60lb/hr injectors, Ford slot MAF in custom 3" housing. Moates Quarterhorse with Binary Editor, using the PAAD6 database.

OpenEEC Telegram Chat:
Telegram

034v
Gear Head
Posts: 5
Joined: Mon Jun 11, 2018 2:03 pm

Re: CZAJL XDF for TPRT (93-95 Lincoln Mark VIII)

Post by 034v » Sun Feb 10, 2019 11:20 am

Here is a 4.10 starter BIN
Attachments
0.bin
(56 KiB) Downloaded 8 times

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests