ISCKAM2 creeps up when commanded idle above set

Anything about Ford EEC tuning. TwEECer and Moates questions dominate, but there's some SCT and OBD-II knowledge too.

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
User avatar
EECBandit
Regular
Posts: 74
Joined: Sun Aug 21, 2016 8:18 am

ISCKAM2 creeps up when commanded idle above set

Post by EECBandit » Sat May 25, 2019 9:43 am

Hello everyone,
It's been a while, hope everyone is doing alright.

I've got my idle set up per Decipha's write up and it's working really well.

One thing I noticed is if I idle in neutral for a while, the commanded idle goes from 848 to 880 (fan comes on, electrical load, etc). When this happens, the ISCKAM2 creeps up to around .06, when commanded idle is 848 it runs about .013.

Is there a way to compensate ISCKAM2 when the idle is above the commanded idle?



Thanks

User avatar
EECBandit
Regular
Posts: 74
Joined: Sun Aug 21, 2016 8:18 am

Re: ISCKAM2 creeps up when commanded idle above set

Post by EECBandit » Fri May 31, 2019 10:54 pm

I figured it out. When I rescaled FN070 I didn't update my adaptive table, I had everything in the low rpm range pointing to -82 which was 1450 RPM, made it -80 (800rpm) and all is good.

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests