trying to get the fuel dialed in logs provided

Anything about Ford EEC tuning. TwEECer and Moates questions dominate, but there's some SCT and OBD-II knowledge too.

Moderators: cgrey8, EDS50, 2Shaker, Jon 94GT

Post Reply
Gear Head
Posts: 24
Joined: Tue Mar 23, 2010 6:55 pm

trying to get the fuel dialed in logs provided

Post by tommybunz » Mon Jun 24, 2019 10:36 pm

been doing some work to the tune, and trying to dial in fuel using mafv wideband and lambses. i have a few logs from idle normal driving and a WOT pull. any input would help.
(1.83 MiB) Downloaded 55 times
(54.79 KiB) Downloaded 57 times
(1.01 MiB) Downloaded 53 times
TommyB (rev3) MAF no ADPLRN.BIN
(56 KiB) Downloaded 59 times
95 gt
96 357w block, dss pistons 10.7:1, Vic jr. heads, 1.6rr, crower 15513 cam, pro products carbd style efi lower & spyder 90mm upper elbow, bbk long tubes and Xpipe, bbk 70mm t-body, no smog, no a/c, frpp 42#r's, PMAS 95mm slot style, stock dizzy, stock 8.8 with 3.27's, 3550 tranny
t4mo= ecu/ quarter horse and lc1

Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests