trying to get the fuel dialed in logs provided

Anything about Ford EEC tuning. TwEECer and Moates questions dominate, but there's some SCT and OBD-II knowledge too.

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
tommybunz
Gear Head
Posts: 24
Joined: Tue Mar 23, 2010 6:55 pm

trying to get the fuel dialed in logs provided

Post by tommybunz » Mon Jun 24, 2019 10:36 pm

been doing some work to the tune, and trying to dial in fuel using mafv wideband and lambses. i have a few logs from idle normal driving and a WOT pull. any input would help.
2019_Jun_22_16-30-51.csv
(1.83 MiB) Downloaded 8 times
2019_Jun_22_16-40-21.csv
(54.79 KiB) Downloaded 7 times
2019_Jun_22_16-40-59.csv
(1.01 MiB) Downloaded 6 times
TommyB (rev3) MAF no ADPLRN.BIN
(56 KiB) Downloaded 9 times
95 gt
96 357w block, dss pistons 10.7:1, Vic jr. heads, 1.6rr, crower 15513 cam, pro products carbd style efi lower & spyder 90mm upper elbow, bbk long tubes and Xpipe, bbk 70mm t-body, no smog, no a/c, frpp 42#r's, PMAS 95mm slot style, stock dizzy, stock 8.8 with 3.27's, 3550 tranny
t4mo= ecu/ quarter horse and lc1

Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests