I have what I thought was a good A9L PCM till I hooked it up to a 90 Must.
It runs the car fine but I have no live data in logs for ECT or ACT . The values seen to be PCM substitutes
The car's original PCM does have the actual data.'
The Caps look a little funky though. Using BE and QH .
Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker
A9L data prob
2000 Lightning , Stock 5.4, 4# pulley, 4.10 gears, ported blower, SCT2600 Maf, 12lbs boost,SCT x4 .Pulls hard..
- cgrey8
- Administrator
- Posts: 11094
- Joined: Fri Jun 24, 2005 5:54 am
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Re: A9L data prob
Was there a question?
...Always Somethin'
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
Re: A9L data prob
The question is . Does the fact that I do not have good ECT and Act data indicate a bad PCM ?
The sensors and wiring are good.
The sensors and wiring are good.
2000 Lightning , Stock 5.4, 4# pulley, 4.10 gears, ported blower, SCT2600 Maf, 12lbs boost,SCT x4 .Pulls hard..
Re: A9L data prob
How have you determined you have bad ect/act data? What is being displayed vs what is actual on your gauge?
1992 Mustang LX - 25.1c Chassis, Vortech Blown Dart 333 on Meth, Lentech Trans, TRZ Backhalf, A9P Tune, Moates QH/SL v1.9, BE, EA, TunerView
2003 Mach 1 - Core Tuning RYAK1/ZYA2 QH Tuned, Borla Atak Cat Back, Pypes X-Pipe, Twin 65mm TB, K&N CAI, ICT Billet Intake Spacer, Eibach Pro Series Plus Suspension, Steeda Adj. Upper/Lower Control Arms, QA1 Bump Steer, Steeda Short Throw Shifter, 315/35/17's.
2003 Mach 1 - Core Tuning RYAK1/ZYA2 QH Tuned, Borla Atak Cat Back, Pypes X-Pipe, Twin 65mm TB, K&N CAI, ICT Billet Intake Spacer, Eibach Pro Series Plus Suspension, Steeda Adj. Upper/Lower Control Arms, QA1 Bump Steer, Steeda Short Throw Shifter, 315/35/17's.
-
- Regular
- Posts: 63
- Joined: Thu Feb 15, 2007 6:19 pm
Re: A9L data prob
Is tune 1 in the qh selected? Found out the hard way that it didnt read tp, ect, iat, iac in position 3 in the qh.
Who is online
Users browsing this forum: No registered users and 24 guests