[bmasencup]

I asked this question a long time ago and never got a reply so trying again. This is one of those projects that just keeps getting pushed out, but I am ready to get the exhaust put on and get all my O2 sensors installed. I have a '99 5.0L from an Explorer. My setup is a READ0 strategy on a EEC-V PCM. I have looked through everything related to EGR and I cannot find a scaler to disable it. I can probably change some of the limits to trick it into not operating, but I want to hook up the analog output of my wideband to the EGR input on the PCM for logging with QH. I have looked at a few other strategies and the EGR disable is obvious, but I can't find it on my strategy.