Anything about Ford EEC tuning. TwEECer and Moates questions dominate, but there's some SCT and OBD-II knowledge too.

Moderators: EDS50, cgrey8, 2Shaker, Jon 94GT

Post Reply
User avatar
pthornton
Tuning Addict
Posts: 713
Joined: Sat Nov 01, 2003 5:11 pm
Location: Tupelo, MS

Sing Hallelujah

Post by pthornton » Fri Jan 20, 2006 9:53 am

Dance before Me, sayeth The Lord, and rejoice.
Shout the victory and break forth into singing.
Lift up your voices with a loud cry and let all nature break forth with joyous celebration.
Let the victory bells ring and let the holy angels sing.
I am tweecer free!!!!!!!
I have declared both tunes complete and now run moates chips in both cars!

Randy
Cobra Intake / AFR 165 Heads
CompCams 270H Camshaft
1989 Saleen Coupe # 653 *****

User avatar
boss96
Tuning Addict
Posts: 836
Joined: Thu Mar 06, 2003 3:02 pm
Location: Ft Lauderdale
Contact:

Post by boss96 » Fri Jan 20, 2006 12:06 pm

Congrats, Randy, I did not know you were such an evangelical :D
Bob
96 GT, Vortech Si trim,Procharger 3 core intercooler, forged bottom end, MAC longtubes, ported PI heads , Edelbrock intake, Crower cams-.580lift/234dur@.050, 80lb injectors, CDAN4/GGL4 processor.

User avatar
incon_331_twinturbos
Regular
Posts: 181
Joined: Wed Oct 15, 2003 9:24 pm
Location: Milner, GA. 30257
Contact:

Post by incon_331_twinturbos » Fri Jan 20, 2006 3:06 pm

:lol: congrats....
1979 Ford Fairmont 4DR.
331, A9P, HPX 05+slot meter, SD 60# inj., T4MO, CBAZA, built AOD, Systemax U/L, TFS stage 2 heads, custom turbo grind 536/513 w 1.6rr , 224/218, 112* Int. CL, FMS 3.27, PonyDown Stg.3 turbo kit w/Turbonetics T76 (.96A/R), sumped tank with -8feed/-6 return, twin 225lph, aeromotive rails,

Moates QH, LC-1, BE/EA

Dale McPeters
Professional Tuner/Shop Owner
Posts: 1772
Joined: Sat Nov 02, 2002 6:08 pm
Location: In the dog house

Post by Dale McPeters » Mon Jan 23, 2006 10:16 am

Randy,
Have you tried Craig's emulator yet?
'88GT, T-Top (Being rebuilt)-Moates Hardware waiting....
BE & EEC Analyzer
'93 Teal Cobra-Moates Hardware
Paul's EEC-Editor

User avatar
pthornton
Tuning Addict
Posts: 713
Joined: Sat Nov 01, 2003 5:11 pm
Location: Tupelo, MS

Post by pthornton » Mon Jan 23, 2006 11:27 am

Dale McPeters wrote:Randy,
Have you tried Craig's emulator yet?
Nah, no need to. My tunes have been stable for some time now.
Cobra Intake / AFR 165 Heads
CompCams 270H Camshaft
1989 Saleen Coupe # 653 *****

Dale McPeters
Professional Tuner/Shop Owner
Posts: 1772
Joined: Sat Nov 02, 2002 6:08 pm
Location: In the dog house

Post by Dale McPeters » Mon Jan 23, 2006 11:40 am

pthornton wrote:
Dale McPeters wrote:Randy,
Have you tried Craig's emulator yet?
Nah, no need to. My tunes have been stable for some time now.
Good deal.
Did you use the F3 J3 adapter on the '96?
'88GT, T-Top (Being rebuilt)-Moates Hardware waiting....
BE & EEC Analyzer
'93 Teal Cobra-Moates Hardware
Paul's EEC-Editor

User avatar
pthornton
Tuning Addict
Posts: 713
Joined: Sat Nov 01, 2003 5:11 pm
Location: Tupelo, MS

Post by pthornton » Mon Jan 23, 2006 1:22 pm

Dale McPeters wrote: Did you use the F3 J3 adapter on the '96?
Yep, Used F3 connected to BURN1 with the F2A adapter.
Cobra Intake / AFR 165 Heads
CompCams 270H Camshaft
1989 Saleen Coupe # 653 *****

Dale McPeters
Professional Tuner/Shop Owner
Posts: 1772
Joined: Sat Nov 02, 2002 6:08 pm
Location: In the dog house

Post by Dale McPeters » Mon Jan 23, 2006 2:24 pm

pthornton wrote:
Dale McPeters wrote: Did you use the F3 J3 adapter on the '96?
Yep, Used F3 connected to BURN1 with the F2A adapter.
I need to order some F3's as they should be easier to burn than the
F1/C2's that I currently have since he has them available now.
I already have the F2A adapter & BURN1.

Thanks for the info.
'88GT, T-Top (Being rebuilt)-Moates Hardware waiting....
BE & EEC Analyzer
'93 Teal Cobra-Moates Hardware
Paul's EEC-Editor

Post Reply

Who is online

Users browsing this forum: No registered users and 192 guests