Quarter Horse Anti-lag setup

[95GTSpeedDemon]

Anti-Lag tune switching will need the pins soldered to the QH. These are the instructions from Moates. I have extra female connectors to solder on and male wiring connectors. When I run out, contact Moates.
http://www.moates.net/documentation.php ... tion_id=78
Its only active when the arming switch is on, clutch is pushed in and its in 1st gear.







Setup tune as followed:


(CBAZA) Change all 3 timing tables, & MBT table set to 55 (disabled)


End result:

[95GTSpeedDemon]

due to photobucket being useless...

[95GTSpeedDemon]

#2

[decipha]

i wrote a two step code for cbaza two years ago back in 15, instead of doing all that you can just enable it in the tune and it will be active when your foot is on the brake and your not moving, vehicle speed = 0, as soon as u take your foot of the brake or the car moves it disables it

post your bin and ill patch it for you if your interested

[95GTSpeedDemon]

that would be great.