Quarter Horse Anti-lag setup

Have a suggestion or a submission for a FAQ or Tech Doc? Post it here...

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
95GTSpeedDemon
Gear Head
Posts: 42
Joined: Thu Feb 15, 2007 6:19 pm

Quarter Horse Anti-lag setup

Post by 95GTSpeedDemon » Wed Dec 16, 2015 10:29 pm

Anti-Lag tune switching will need the pins soldered to the QH. These are the instructions from Moates. I have extra female connectors to solder on and male wiring connectors. When I run out, contact Moates.
http://www.moates.net/documentation.php ... tion_id=78
Its only active when the arming switch is on, clutch is pushed in and its in 1st gear.
Image
Image
Image
Image
Image
Image
Image
Setup tune as followed:
Image
Image
(CBAZA) Change all 3 timing tables, & MBT table set to 55 (disabled)
Image

End result:
Image

95GTSpeedDemon
Gear Head
Posts: 42
Joined: Thu Feb 15, 2007 6:19 pm

Re: Quarter Horse Anti-lag setup

Post by 95GTSpeedDemon » Thu Sep 07, 2017 8:24 pm

due to photobucket being useless...
Attachments
male connector_zps8jxm1tjt.JPG
male connector_zps8jxm1tjt.JPG (195.94 KiB) Viewed 507 times
clutch switch_zpsyfif1xxn.JPG
clutch switch_zpsyfif1xxn.JPG (120.5 KiB) Viewed 507 times
circuit diagram_zpsx2tjlgad.PNG
circuit diagram_zpsx2tjlgad.PNG (431.37 KiB) Viewed 507 times
change overview_zpsaxrwnmio.PNG
change overview_zpsaxrwnmio.PNG (18.88 KiB) Viewed 507 times
arming switch_zpsmept4th2.JPG
arming switch_zpsmept4th2.JPG (183.34 KiB) Viewed 507 times

95GTSpeedDemon
Gear Head
Posts: 42
Joined: Thu Feb 15, 2007 6:19 pm

Re: Quarter Horse Anti-lag setup

Post by 95GTSpeedDemon » Thu Sep 07, 2017 8:26 pm

#2
Attachments
wiring_zpsu2tk51qz.JPG
wiring_zpsu2tk51qz.JPG (166.24 KiB) Viewed 506 times
timing table_zps6svb6trz.PNG
timing table_zps6svb6trz.PNG (29.43 KiB) Viewed 506 times
Shifter switch_zpszdghokur.JPG
Shifter switch_zpszdghokur.JPG (205.1 KiB) Viewed 506 times
shifter 2_zpset8sm8y6.JPG
shifter 2_zpset8sm8y6.JPG (244.31 KiB) Viewed 506 times
mode_zps0uiv72el.JPG
mode_zps0uiv72el.JPG (187.14 KiB) Viewed 506 times

decipha

Re: Quarter Horse Anti-lag setup

Post by decipha » Sat Sep 09, 2017 5:15 am

i wrote a two step code for cbaza two years ago back in 15, instead of doing all that you can just enable it in the tune and it will be active when your foot is on the brake and your not moving, vehicle speed = 0, as soon as u take your foot of the brake or the car moves it disables it

post your bin and ill patch it for you if your interested

95GTSpeedDemon
Gear Head
Posts: 42
Joined: Thu Feb 15, 2007 6:19 pm

Re: Quarter Horse Anti-lag setup

Post by 95GTSpeedDemon » Sat Sep 09, 2017 7:37 am

that would be great.
Attachments
17psi v83.BIN
(56 KiB) Downloaded 18 times

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest