TwEECer Definitions

Have a suggestion or a submission for a FAQ or Tech Doc? Post it here...

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
gc60
Gear Head
Posts: 5
Joined: Mon Dec 08, 2014 12:42 pm
Location: Kamloops BC Canada

TwEECer Definitions

Post by gc60 » Tue Dec 16, 2014 6:31 pm

To Moderators
I have an Excel file which has 4 sheets; Common terms, Functions, Scalars & Tables for TwEECer / ECC definitions. with notes for values / adjustments. I downloaded the file from a link off Wolf Engineering's site a few years ago. It was authored by Richard White; nothing on it says it is copy righted. It has a lot of information that may be useful to new or even intermediate tuners. I thought I would check with the moderators of this board before posting it as I am not the author. I have referenced it a lot while tuning my truck with good success; though I am far from being able to verifying whether it is all correct, it seems to have a lot of good info. If you would like to review it I can forward a copy to you or I can post it here if appropriate.
Thanks

User avatar
cgrey8
Administrator
Posts: 10439
Joined: Fri Jun 24, 2005 5:54 am
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: TwEECer Definitions

Post by cgrey8 » Tue Dec 16, 2014 9:02 pm

Post away. I'll leave it up or transfer it to the Tech Docs section. As long as it was posted elsewhere for free download AND it has no indications with in that it is not intended for free distribution, then I don't see why there would be any issue. However if the original author wishes it to be removed in the future, I would, of course, honor that request.
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, 1.6RRs, FMS Explorer (GT40p) headers, Slot Style MAF, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, Innovate LC-1, GUFB, Moates QuarterHorse tuned using BE&EA

Member V8-Ranger.com

gc60
Gear Head
Posts: 5
Joined: Mon Dec 08, 2014 12:42 pm
Location: Kamloops BC Canada

Re: TwEECer Definitions

Post by gc60 » Wed Dec 17, 2014 5:19 pm

Here is the file. Just got TwEECer CalCon RT1.32 working (with patch from Mike); Info here is similar to PID Tool Tips now part of CalCon 1.32. But may be useful to those not using it
Attachments
TweecerDefs.111804(1).xls
(616.5 KiB) Downloaded 494 times
69 Chevy Short box Step side 4x4; NV4500 5spd w ford vss; Centerforce 12" Clutch; 383 Stroker; CompCams Extreme 4x4 12-235-2; Edelbrock Streetmaster EFI manifold (circa 1970s); Modified for: ECCIV A9L / TwEECerRT; Ford racing 75mm TB; PRO-M 75mm MAF; Bosh 24# disc injectors; custom built Ford top / Chevy bottom Distributer; long tube headers & 3" dual mandrel bent exhaust. A/C P/W P/L P/S Cruise (ford)
Just because you can doesn't mean you should

mJacobsenst
Gear Head
Posts: 6
Joined: Sun Dec 14, 2014 10:21 pm

TwEECer Definitions

Post by mJacobsenst » Mon Mar 16, 2015 12:08 pm

try Marti Autoworks in Arizona....there is a link in the links section

93Cobra#2771
Tuning Addict
Posts: 1167
Joined: Thu Mar 06, 2003 3:43 pm
Location: Sweetwater, TN
Contact:

Re: TwEECer Definitions

Post by 93Cobra#2771 » Sun Apr 29, 2018 8:35 pm

That is my old document that I pulled together many years ago. It was done prior to the gufb document coming out, and then updated somewhat.

I put it out there for the community, and is free for everyone to use. 100% free use for everyone.
Richard White
X3Z, RT, GT40y's, ported intakes, Steeda #18, AFM PP, 80mm Pro-M, MSD, MAC E/L, Dr Gas X, 3.73, etc.

I do Reproduction Mustang Window Stickers!

"Tweecer Defs" http://autos.groups.yahoo.com/group/twe ... mentation/

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest