KAMCLR - where is it in BE?

Have a suggestion or a submission for a FAQ or Tech Doc? Post it here...

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
jfmartin1972
Gear Head
Posts: 4
Joined: Wed Aug 05, 2009 2:42 pm

KAMCLR - where is it in BE?

Post by jfmartin1972 » Thu Oct 22, 2009 12:17 am

Hello all,

I am new at tuning and just like you enjoy it immensly. I read about Z_KAMCLR in BE. Yet I have not found it.
I have a CBAZA, J4J1. I am not for certain if it is specific to this strategy or not but it does not appear to be there.
Is it specific to certain strats?

Looking forward to your feed back

User avatar
cgrey8
Administrator
Posts: 10439
Joined: Fri Jun 24, 2005 5:54 am
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: KAMCLR - where is it in BE?

Post by cgrey8 » Thu Oct 22, 2009 6:45 am

That's correct. Z_KAMCLR is specific to the 3 GUFx defs. CBAZA doesn't contain that setting. It might could if some BIN hackers wanted to figure out how. But so far, there's been very little interest in BIN hacking the CBAZA strategy or any other strategy by the people that know how.

The 3 GUFx defs have quite a few hack PIDs...all of which are recognizable by the Z_ prefix to the PID name.
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, 1.6RRs, FMS Explorer (GT40p) headers, Slot Style MAF, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, Innovate LC-1, GUFB, Moates QuarterHorse tuned using BE&EA

Member V8-Ranger.com

decipha

Re: KAMCLR - where is it in BE?

Post by decipha » Sat Oct 24, 2009 6:00 pm

i don't know what that does or is but it sounds like it clears the kam... cbaza has that scalar already available.

User avatar
cgrey8
Administrator
Posts: 10439
Joined: Fri Jun 24, 2005 5:54 am
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: KAMCLR - where is it in BE?

Post by cgrey8 » Sat Oct 24, 2009 9:20 pm

I didn't realize CBAZA had something like that...neat. What's the PID name?
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, 1.6RRs, FMS Explorer (GT40p) headers, Slot Style MAF, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, Innovate LC-1, GUFB, Moates QuarterHorse tuned using BE&EA

Member V8-Ranger.com

User avatar
EDS50
Administrator
Posts: 3551
Joined: Sun Apr 05, 2009 9:17 am
Location: Tampa Bay, FL
Contact:

Re: KAMCLR - where is it in BE?

Post by EDS50 » Mon Oct 26, 2009 9:01 pm

cgrey8 wrote:I didn't realize CBAZA had something like that...neat. What's the PID name?

XKAMRF Fuel - Force KAMRF Reset

8)
1992 LX - 25.1c Chassis, Vortech Blown Dart 332, Lentech Trans, TRZ Backhalf, A9L, Moates QH/SL v1.9, BE, EA, TunerView

User avatar
EDS50
Administrator
Posts: 3551
Joined: Sun Apr 05, 2009 9:17 am
Location: Tampa Bay, FL
Contact:

Re: KAMCLR - where is it in BE?

Post by EDS50 » Mon Oct 26, 2009 9:03 pm

decipha wrote:i don't know what that does or is but it sounds like it clears the kam... cbaza has that scalar already available.

You are correct. In CBAZA it is XKAMRF. In GUFx it is Z_KAMCLR.
1992 LX - 25.1c Chassis, Vortech Blown Dart 332, Lentech Trans, TRZ Backhalf, A9L, Moates QH/SL v1.9, BE, EA, TunerView

User avatar
cgrey8
Administrator
Posts: 10439
Joined: Fri Jun 24, 2005 5:54 am
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: KAMCLR - where is it in BE?

Post by cgrey8 » Tue Oct 27, 2009 5:29 am

Good to know...
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, 1.6RRs, FMS Explorer (GT40p) headers, Slot Style MAF, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, Innovate LC-1, GUFB, Moates QuarterHorse tuned using BE&EA

Member V8-Ranger.com

decipha

Re: KAMCLR - where is it in BE?

Post by decipha » Tue Oct 27, 2009 6:12 pm

cgrey8 wrote:Good to know...

haven't you realized, anything your ecu can do my ecu can do better.

my ecu can do anything better than yours.

no it cant! yes it can. No it can't! YESSSSS ITTT CANNNNNNN.

tu-shay

just messing with ya cgrey8, don't break into my car at night and corrupt my tune

:lol:

User avatar
cgrey8
Administrator
Posts: 10439
Joined: Fri Jun 24, 2005 5:54 am
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: KAMCLR - where is it in BE?

Post by cgrey8 » Tue Oct 27, 2009 6:26 pm

:?: :?: :?: Ummm....ok.

I know I talk praises about the GUFx strats in BE. But I wasn't aware that I talked down CBAZA. I don't know CBAZA that well at all hence why I can't say much about it.
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, 1.6RRs, FMS Explorer (GT40p) headers, Slot Style MAF, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, Innovate LC-1, GUFB, Moates QuarterHorse tuned using BE&EA

Member V8-Ranger.com

decipha

Re: KAMCLR - where is it in BE?

Post by decipha » Tue Oct 27, 2009 6:46 pm

sorry man i didn't mean to offend you i was just ATTEMPTING to making a funny

stupid interweb doesn't let folks express sarcasm

blame barack its his fault

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/hKe1gUgX5do&hl ... ram><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/hKe1gUgX5do&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

User avatar
cgrey8
Administrator
Posts: 10439
Joined: Fri Jun 24, 2005 5:54 am
Location: Acworth, Ga (Metro Atlanta)
Contact:

Re: KAMCLR - where is it in BE?

Post by cgrey8 » Tue Oct 27, 2009 6:55 pm

You didn't offend...I just didn't know how to take it. Stupid me...
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, 1.6RRs, FMS Explorer (GT40p) headers, Slot Style MAF, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, Innovate LC-1, GUFB, Moates QuarterHorse tuned using BE&EA

Member V8-Ranger.com

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests