EEC-V calibration list 1996-2006

Have a suggestion or a submission for a FAQ or Tech Doc? Post it here...

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
Posts: 63
Joined: Sun Oct 08, 2006 2:48 am

EEC-V calibration list 1996-2006

Post by Mudog715 » Tue Dec 15, 2009 2:48 am

Excel spreadsheet that lists every catch code (calibration) from 1996-2004, along with the engine application, EEC hardware code, original part # and new part #. Really handy for seeing what vehicles ran what EEC or comparing the different calibrations that shared the same hardware.
EEC-V Calibration List
(1.36 MiB) Downloaded 1954 times

1967 Kaiser-Jeep M-715 '5-Quarter' Army truck
521 stroker, 9.5:1, ported F3 heads 2.19/1.76, 278/284 Hyd Roller Cam, Banks headers, 2x62mm TB, 90LMAF, 60#Dekas
EEC-V (FOU1-CNAB1) mass-air/SFI/OBD2, integral EDIS w/ custom CKP & CID sensors, twEECer RT
E4OD heavily modified, 2200rpm stall triple lock billet

User avatar
Posts: 10584
Joined: Fri Jun 24, 2005 5:54 am
Location: Acworth, Ga (Metro Atlanta)

Re: EEC-V calibrration list 1996-2006

Post by cgrey8 » Tue Dec 15, 2009 6:33 am

There's a similar list on the EEC Analyzer website. See if you can filter the duplicates and find any that your list might have that the EEC Analyzer website list doesn't, and email those to Clint (86GT).
...Always Somethin'

89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, 1.6RRs, FMS Explorer (GT40p) headers, Slot Style MAF, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, Innovate LC-1, GUFB, Moates QuarterHorse tuned using BE&EA


Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests