This is where the BIN Hackers and definition junkies discuss the inner workings of the EEC code and hardware. General tuning questions do not go here. Only technical/hardware-specific/code questions and discussions belong here.

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
Nctarheel1980
Gear Head
Posts: 7
Joined: Fri Sep 12, 2014 1:53 am
Location: Prince George, VA

Need bin for A4X3

Post by Nctarheel1980 » Fri Sep 12, 2014 2:05 am

I have a 94 base mustang v6 man trans and just received the quarterhorse, my plan is to use the thunderbird SC top end on this car. Wondering if there is someone out there that might have all the tunes done up that I may get from you.

decipha

Re: Need bin for A4X3

Post by decipha » Sat Sep 13, 2014 2:05 pm

the stock bottom end on the na 3.8s usually doesnt last long with boost

many have done and blown them up

Nctarheel1980
Gear Head
Posts: 7
Joined: Fri Sep 12, 2014 1:53 am
Location: Prince George, VA

Re: Need bin for A4X3

Post by Nctarheel1980 » Sun Sep 14, 2014 9:15 am

I'm going all out on the motor. I have a working .bin file I just don't have the strategy file. I want to use eec editor or tunerpro.

harold
Gear Head
Posts: 56
Joined: Sat Mar 30, 2013 3:58 pm

Re: Need bin for A4X3

Post by harold » Sun Sep 14, 2014 10:34 am

According to the Moates site, CCAQE is supported by EEC Editor.
Porsche 944
Stock 302 with a GT40 lower and custom upper, Ford slot MAF, custom headers

Nctarheel1980
Gear Head
Posts: 7
Joined: Fri Sep 12, 2014 1:53 am
Location: Prince George, VA

Re: Need bin for A4X3

Post by Nctarheel1980 » Sun Sep 14, 2014 10:50 am

Ya but I can't find the file anywhere. Does anyone have it and can pm it to me?

harold
Gear Head
Posts: 56
Joined: Sat Mar 30, 2013 3:58 pm

Re: Need bin for A4X3

Post by harold » Sun Sep 14, 2014 11:18 am

The strategies are $20 for EEC-IV and $30 for EEC-V. I don't know that anybody is just going to send you a copy of theirs.
Porsche 944
Stock 302 with a GT40 lower and custom upper, Ford slot MAF, custom headers

decipha

Re: Need bin for A4X3

Post by decipha » Sun Sep 14, 2014 11:43 am

your best bet is to get the complete def from sailorbob, i think he only offers it for BE though

Nctarheel1980
Gear Head
Posts: 7
Joined: Fri Sep 12, 2014 1:53 am
Location: Prince George, VA

Re: Need bin for A4X3

Post by Nctarheel1980 » Sun Sep 14, 2014 12:33 pm

harold wrote:The strategies are $20 for EEC-IV and $30 for EEC-V. I don't know that anybody is just going to send you a copy of theirs.

Not to sound stupid, I'm new to the QH for $30 I'll get the file. But the ? Is from where?

harold
Gear Head
Posts: 56
Joined: Sat Mar 30, 2013 3:58 pm

Re: Need bin for A4X3

Post by harold » Sun Sep 14, 2014 12:44 pm

Nctarheel1980 wrote:
harold wrote:The strategies are $20 for EEC-IV and $30 for EEC-V. I don't know that anybody is just going to send you a copy of theirs.

Not to sound stupid, I'm new to the QH for $30 I'll get the file. But the ? Is from where?
From the Moates page for EEC Editor.
Porsche 944
Stock 302 with a GT40 lower and custom upper, Ford slot MAF, custom headers

decipha

Re: Need bin for A4X3

Post by decipha » Tue Sep 16, 2014 4:05 pm

might as well spend $25 and get the complete def

Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests