This is where the BIN Hackers and definition junkies discuss the inner workings of the EEC code and hardware. General tuning questions do not go here. Only technical/hardware-specific/code questions and discussions belong here.

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
Chucko
Tuning Addict
Posts: 607
Joined: Tue Nov 04, 2003 11:42 pm
Location: Silicon Valley, CA, USA
Contact:

GUFB goodies at github

Post by Chucko » Sat Mar 14, 2020 2:24 am

After a considerable amount of assembly code reading and pondering, and some testing on my own '89 5.0, I'm letting the world see my private stash of GUFB tweaks at https://github.com/chucko58/EEC-IV_A9L.

Thanks to the OpenEEC Project for the original disassembly listing on which all this stuff is based.

Have a look and let me know what you think.
'89 LX 5.0, Crane 2040, Pro-M 75mm Bullet, 65 mm TB, ported stock intake & E7TE heads, 24 lb injs., JBA shortys, cat X-pipe, A3M1 (GUFB strategy) w/Moates Quarterhorse, BE & EA, close ratio T5Z, 3.55 rear

motorhead1991
Regular
Posts: 171
Joined: Tue Nov 21, 2017 2:32 am

Re: GUFB goodies at github

Post by motorhead1991 » Sat Mar 14, 2020 1:46 pm

That's what OpenEEC is there for :grin:. I'm glad others are finally warming up to the idea of a unified effort.
1990 Ford Ranger FLH2 conversion. Ford forged/dished pistons, Total Seal file-fit rings, Clevite rod and main bearings, Clevite cam bearings, IHI turbo, Siemens Deka 60lb/hr injectors, Ford slot MAF in custom 3" housing. Moates Quarterhorse with Binary Editor, using the PAAD6 database.

OpenEEC Telegram Chat:
Telegram

Post Reply
cron