Throttle status...

Anything about Ford EEC tuning. TwEECer and Moates questions dominate, but there's some SCT and OBD-II knowledge too.

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
Fordpowered90
Gear Head
Posts: 17
Joined: Fri Jan 13, 2017 10:33 pm
Location: VA

Throttle status...

Post by Fordpowered90 » Sat Jul 07, 2018 7:36 pm

what logs the change in ct/pt/wot? my tune just reads closed throttle the whole time, what can be changed to make it register?
90GT, 408ci, TFS Box-R, 90mm TB, Edelbrock Performer RPM Heads, XE282HR CamShaft, SCT BA-3000 MAF, 60lb Injectors, 9psi Powerdyne, Shorty Headers, X-Pipe, 4.10 Gears, Moates QuarterHorse, Binary Editor

User avatar
skunk
Tuning Addict
Posts: 391
Joined: Sat Jun 25, 2011 2:30 pm
Location: Newmarket, ON

Re: Throttle status...

Post by skunk » Sat Jul 07, 2018 10:53 pm

What software are you using? If using BE double click on the TS guage. Another window opens set enumeration and 3. Near the bottom you will have Value and Text. Set the values from top to bottom as -1, 0, 1 and Text top to bottom as CT, PT, WOT. If your using TunerPro.....sorry I can't help.

John
1987 Turbocoupe.
A3M1/A9L, BE/EA, Tweecer RT.
306,Single Turbo, Ported E7's, Ported Stock Intake, 42lb Matched Green Tops, PMAS 3" Blow-Thru Protube (42# supercharger calibrated),T5z, 3.73 gears
..... Nothin Fancy.......Just something to keep me from the honey-do list.........

Fordpowered90
Gear Head
Posts: 17
Joined: Fri Jan 13, 2017 10:33 pm
Location: VA

Re: Throttle status...

Post by Fordpowered90 » Sat Jul 07, 2018 11:30 pm

sorry its BE, thanks for reply.
90GT, 408ci, TFS Box-R, 90mm TB, Edelbrock Performer RPM Heads, XE282HR CamShaft, SCT BA-3000 MAF, 60lb Injectors, 9psi Powerdyne, Shorty Headers, X-Pipe, 4.10 Gears, Moates QuarterHorse, Binary Editor

Post Reply

Who is online

Users browsing this forum: No registered users and 25 guests