Moates Quarterhorse

Errors, Crashes, and Bugs, Oh My! This is where issues specific to tuning software goes. General questions about software features & capabilities are also welcome here.

Moderators: cgrey8, EDS50, Jon 94GT, 2Shaker

Post Reply
Excursion1
Gear Head
Posts: 3
Joined: Sat May 04, 2019 5:37 pm

Moates Quarterhorse

Post by Excursion1 » Sat May 04, 2019 8:16 pm

Im new to this world so here goes 2000 v10 excursion purchased a moates and using tuner pro rt.FXU4 mpam1 read out bin using qhorse downloaded FBFG2 xdf file using adx. decipha_sl_qh_dma truck wont start changed PATS setting still no go hmmm any thoughts

Excursion1
Gear Head
Posts: 3
Joined: Sat May 04, 2019 5:37 pm

Re: Moates Quarterhorse

Post by Excursion1 » Thu May 23, 2019 11:42 pm

Hmm not a single reply

motorhead1991
Regular
Posts: 124
Joined: Tue Nov 21, 2017 2:32 am

Re: Moates Quarterhorse

Post by motorhead1991 » Fri May 24, 2019 12:07 am

Excursion1 wrote:
Thu May 23, 2019 11:42 pm
Hmm not a single reply
I'm not sure how I missed this one.

Possible causes for a no-start are:
PATS as already discussed
Corrupt tune*
Incorrect checksum calculation
Dirty J3 port

*IME, corrupting a tune is much easier than people think. The key MUST BE ON before connecting to the Quarterhorse. Playing with the MAF while the engine is running can also do it.
1990 Ford Ranger FLH2 conversion. Ford forged/dished pistons, Total Seal file-fit rings, Clevite rod and main bearings, Clevite cam bearings, IHI turbo, Siemens Deka 60lb/hr injectors, Ford slot MAF in custom 3" housing. Moates Quarterhorse with Binary Editor, using the PAAD6 database.

OpenEEC Telegram Chat:
Telegram

Excursion1
Gear Head
Posts: 3
Joined: Sat May 04, 2019 5:37 pm

Re: Moates Quarterhorse

Post by Excursion1 » Sat May 25, 2019 11:49 pm

Was able to make it work thanks Adam at POPS racing set me all straight

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests