Timing table help

Anything about Ford EEC tuning. TwEECer and Moates questions dominate, but there's some SCT and OBD-II knowledge too.

Moderators: cgrey8, EDS50, 2Shaker, Jon 94GT

Post Reply
Gear Head
Posts: 21
Joined: Thu Jul 21, 2016 10:11 am

Timing table help

Post by alollich » Sat Nov 30, 2019 4:27 pm

Hi all,

I am wondering if anyone is willing to share their timing table (FN904a). I have a table that seems decent after driving and logging for a while now, but I would like to compare it to some others. Specifically I am looking for a sea level timing table for a 302-306 heads/cam/intake high stall aod car or truck. Basically a trick trickw top end kit combo with a lot of stall in the aod. I am curious about my part throttle/tip in/cruise timing figures. My WOT seems to be as far as I can go before my combo detonates/pings.

Just for reference this combo is in my lifted truck so there is a a lot of weight to be moved by the 302. I attached my current table below. Thank you.


User avatar
Posts: 146
Joined: Thu Jun 24, 2010 3:21 pm
Location: Finland

Re: Timing table help

Post by FinnCobra » Sun Dec 01, 2019 12:30 pm

I would use more resolution near peak torque. 750-1000 can use same timing.
Ford Mustang Cobra -94 Mach + Eaton swap in progress. Ford Fiesta ST150
BMW F650GS with Power Commander
Coretuning/Moates/HPTuners/Innovate/Tunernerd Knock Monitor/

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests