Running single HEGO - How to Doc Link broken

Anything about Ford EEC tuning. TwEECer and Moates questions dominate, but there's some SCT and OBD-II knowledge too.

Moderators: cgrey8, EDS50, 2Shaker, Jon 94GT

Post Reply
COYQTE
Gear Head
Posts: 1
Joined: Fri Apr 21, 2017 7:39 pm

Running single HEGO - How to Doc Link broken

Post by COYQTE » Mon May 04, 2020 5:08 am

Hey,

Does anyone have the how to on running a single HEGO, the doc is no longer available.

Cheers,

Matt

User avatar
EDS50
Administrator
Posts: 3787
Joined: Sun Apr 05, 2009 9:17 am
Location: Tampa Bay, FL
Contact:

Re: Running single HEGO - How to Doc Link broken

Post by EDS50 » Mon May 04, 2020 6:26 am

Set NUMEGO to 1 and FN1327 to all 1's or all 2's depending on which bank will retain the narrowband = Done 8)
1992 Mustang LX - 25.1c Chassis, Vortech Blown Dart 332, Lentech Trans, TRZ Backhalf, A9L using A9P Tune, Moates QH/SL v1.9, BE, EA, TunerView

User avatar
EECBandit
Regular
Posts: 87
Joined: Sun Aug 21, 2016 8:18 am

Re: Running single HEGO - How to Doc Link broken

Post by EECBandit » Wed May 13, 2020 8:03 pm

Good new info for me.
I thought it always had to use HEGO 1.
331, 34lb Ford racing injectors, RPMII intake, 75mm TB, AFR 185 heads, AOD with 3200 stall, custom cam 600/605 lift 224/231 @ 0.050, 1 5/8" long tube headers, 2.5" x-pipe

Mustang Dyno - 344 Torq, 359 HP

User avatar
EDS50
Administrator
Posts: 3787
Joined: Sun Apr 05, 2009 9:17 am
Location: Tampa Bay, FL
Contact:

Re: Running single HEGO - How to Doc Link broken

Post by EDS50 » Thu May 14, 2020 12:06 am

You can run the narrow band and wideband in either side as long as you set BE up accordingly. Bank 1 is passenger side...bank 2 is driver side.
1992 Mustang LX - 25.1c Chassis, Vortech Blown Dart 332, Lentech Trans, TRZ Backhalf, A9L using A9P Tune, Moates QH/SL v1.9, BE, EA, TunerView

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests