This is the place for questions about things electrical and mechnanical...or any other automotive-related hardware issue.

Moderators: EDS50, cgrey8, 2Shaker, Jon 94GT

Post Reply
glaser67
Gear Head
Posts: 41
Joined: Wed Oct 05, 2016 6:15 pm
Location: Cleveland OH

RH Hego vs LH Hego

Post by glaser67 » Wed Jul 14, 2021 1:51 pm

Hey all,

Years after having to let me last project go, I'm in the midst of another F150 MAF conversion. I'm pretty set, but for the life of me cannot remember which banks the right hand and left hand HEGO's belong to? Passenger (Bank 1) pin 43 and Driver (Bank 2) 29? Or do I have backwards?

Assume it's OK to ground both to 49 for use with A9L?

I know its a dumb question but for the life of me I cannot find.

Thanks all!
-Glaser67
91' F150 - 408 N/A, X303, Promax 215cc, 10.7:1 CR, TFS Box R intake, 90mm TB, 90mm Pro-M MAF. GUFB/A9L
Top
User avatar
Paulie
Tuning Addict
Posts: 579
Joined: Thu Oct 23, 2008 9:05 pm
Location: Chicagoland

Re: RH Hego vs LH Hego

Post by Paulie » Tue Jul 20, 2021 11:21 am

Passenger side is bank 1 and drivers side is bank 2
1990 Mustang 5.0, HCI, Vortech S-trim, FRPP 42# inj., PMAS MH95, A9L, Moates Quarterhorse, BE/EA, Innovate LC-1.
Top
glaser67
Gear Head
Posts: 41
Joined: Wed Oct 05, 2016 6:15 pm
Location: Cleveland OH

Re: RH Hego vs LH Hego

Post by glaser67 » Tue Jul 20, 2021 11:27 am

Yes, agreed, and thank you for the reply. I'm certain that I'm over thinking this...

Any diangram I've found says right vs left, which goes to which bank, or pin#?

In a mild-build, perfect world, I suspect it wouldn't matter, unless there is an issue with a single bank.
91' F150 - 408 N/A, X303, Promax 215cc, 10.7:1 CR, TFS Box R intake, 90mm TB, 90mm Pro-M MAF. GUFB/A9L
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 28 guests