Was wondering if anyone has ordered a fan controller from Brian Baskin at DCC.
Courious on how long it may have taken you to receive your order.
I ordered on Aug. 14th, sent an email to him around Sept 12th and haven't
Heard anything back and still haven't received the controller.
Any input would be great to hear.
Thanks, Jamie
Moderators: EDS50, cgrey8, 2Shaker, Jon 94GT
-
Jamlx1
- Regular
- Posts: 108
- Joined: Sun Oct 03, 2010 9:56 pm
- Location: Lancaster County - New Holland, Pa
Anyone order a fan controller from dcc
92 Mustang LX- Wild Strawberry:
forged 306, twisted wedge heads, xe-270-hr-12 cam, 1.72 rockers, T5 Zbox, kennebell @ 10 psi with tmoss ported gt40, 1 5/8 bbk long tubes, X-pipe w/cats, mac catback, 3:55's, pmass velocity 95mm, anderson power pipe, 42lb injectors, 190 fuel pump
A9P with A9L GUFB, moates qh 1.6- binary editor and eec analyzer, xd-16 and lc-1
forged 306, twisted wedge heads, xe-270-hr-12 cam, 1.72 rockers, T5 Zbox, kennebell @ 10 psi with tmoss ported gt40, 1 5/8 bbk long tubes, X-pipe w/cats, mac catback, 3:55's, pmass velocity 95mm, anderson power pipe, 42lb injectors, 190 fuel pump
A9P with A9L GUFB, moates qh 1.6- binary editor and eec analyzer, xd-16 and lc-1
-
incon_331_twinturbos
- Regular
- Posts: 181
- Joined: Wed Oct 15, 2003 9:24 pm
- Location: Milner, GA. 30257
- Contact:
Re: Anyone order a fan controller from dcc
I got one from him....it's been a couple years ago. I can't recall how long it took but I believe it took a few weeks. As a matter of fact I need to order another temp. probe, mine broke off....
1979 Ford Fairmont 4DR.
331, A9P, HPX 05+slot meter, SD 60# inj., T4MO, CBAZA, built AOD, Systemax U/L, TFS stage 2 heads, custom turbo grind 536/513 w 1.6rr , 224/218, 112* Int. CL, FMS 3.27, PonyDown Stg.3 turbo kit w/Turbonetics T76 (.96A/R), sumped tank with -8feed/-6 return, twin 225lph, aeromotive rails,
Moates QH, LC-1, BE/EA
331, A9P, HPX 05+slot meter, SD 60# inj., T4MO, CBAZA, built AOD, Systemax U/L, TFS stage 2 heads, custom turbo grind 536/513 w 1.6rr , 224/218, 112* Int. CL, FMS 3.27, PonyDown Stg.3 turbo kit w/Turbonetics T76 (.96A/R), sumped tank with -8feed/-6 return, twin 225lph, aeromotive rails,
Moates QH, LC-1, BE/EA
-
Jamlx1
- Regular
- Posts: 108
- Joined: Sun Oct 03, 2010 9:56 pm
- Location: Lancaster County - New Holland, Pa
Re: Anyone order a fan controller from dcc
Hopefully I receive it soon. Waiting to do a mark viii fan.
92 Mustang LX- Wild Strawberry:
forged 306, twisted wedge heads, xe-270-hr-12 cam, 1.72 rockers, T5 Zbox, kennebell @ 10 psi with tmoss ported gt40, 1 5/8 bbk long tubes, X-pipe w/cats, mac catback, 3:55's, pmass velocity 95mm, anderson power pipe, 42lb injectors, 190 fuel pump
A9P with A9L GUFB, moates qh 1.6- binary editor and eec analyzer, xd-16 and lc-1
forged 306, twisted wedge heads, xe-270-hr-12 cam, 1.72 rockers, T5 Zbox, kennebell @ 10 psi with tmoss ported gt40, 1 5/8 bbk long tubes, X-pipe w/cats, mac catback, 3:55's, pmass velocity 95mm, anderson power pipe, 42lb injectors, 190 fuel pump
A9P with A9L GUFB, moates qh 1.6- binary editor and eec analyzer, xd-16 and lc-1
-
cgrey8
- Administrator
- Posts: 11304
- Joined: Fri Jun 24, 2005 5:54 am
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Re: Anyone order a fan controller from dcc
I run one of his controllers too. But again, it's been since 2005 since I bought it. I don't remember it being terribly long to get though. It's still working great.
...Always Somethin'
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
89 Ranger Supercab, 331 w/GT40p heads, ported Explorer lower, Crane Powermax 2020 cam, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', GUFB, Moates QuarterHorse tuned using BE&EA
Member V8-Ranger.com
-
incon_331_twinturbos
- Regular
- Posts: 181
- Joined: Wed Oct 15, 2003 9:24 pm
- Location: Milner, GA. 30257
- Contact:
Re: Anyone order a fan controller from dcc
I'm running the MarkVIII on mine too (Running the flexalite controller for now, until I can get the other temp probe)Jamlx1 wrote:Hopefully I receive it soon. Waiting to do a mark viii fan.
1979 Ford Fairmont 4DR.
331, A9P, HPX 05+slot meter, SD 60# inj., T4MO, CBAZA, built AOD, Systemax U/L, TFS stage 2 heads, custom turbo grind 536/513 w 1.6rr , 224/218, 112* Int. CL, FMS 3.27, PonyDown Stg.3 turbo kit w/Turbonetics T76 (.96A/R), sumped tank with -8feed/-6 return, twin 225lph, aeromotive rails,
Moates QH, LC-1, BE/EA
331, A9P, HPX 05+slot meter, SD 60# inj., T4MO, CBAZA, built AOD, Systemax U/L, TFS stage 2 heads, custom turbo grind 536/513 w 1.6rr , 224/218, 112* Int. CL, FMS 3.27, PonyDown Stg.3 turbo kit w/Turbonetics T76 (.96A/R), sumped tank with -8feed/-6 return, twin 225lph, aeromotive rails,
Moates QH, LC-1, BE/EA
-
Jamlx1
- Regular
- Posts: 108
- Joined: Sun Oct 03, 2010 9:56 pm
- Location: Lancaster County - New Holland, Pa
Re: Anyone order a fan controller from dcc
I have heard goods things about them, I got the one that has the soft start to it.
92 Mustang LX- Wild Strawberry:
forged 306, twisted wedge heads, xe-270-hr-12 cam, 1.72 rockers, T5 Zbox, kennebell @ 10 psi with tmoss ported gt40, 1 5/8 bbk long tubes, X-pipe w/cats, mac catback, 3:55's, pmass velocity 95mm, anderson power pipe, 42lb injectors, 190 fuel pump
A9P with A9L GUFB, moates qh 1.6- binary editor and eec analyzer, xd-16 and lc-1
forged 306, twisted wedge heads, xe-270-hr-12 cam, 1.72 rockers, T5 Zbox, kennebell @ 10 psi with tmoss ported gt40, 1 5/8 bbk long tubes, X-pipe w/cats, mac catback, 3:55's, pmass velocity 95mm, anderson power pipe, 42lb injectors, 190 fuel pump
A9P with A9L GUFB, moates qh 1.6- binary editor and eec analyzer, xd-16 and lc-1
Re: Anyone order a fan controller from dcc
I've never heard of anyone NOT getting their order.... it just takes a while sometimes...
I have 2 waiting to be installed, but don't recall how long it took to receive them.
I have 2 waiting to be installed, but don't recall how long it took to receive them.
90 GT - In storage, waiting for an engine... probably 351w based and EEC-V for CoP.
87 LX N/A 2.3 - CZAJL & EDIS
http://tunexchange.mustang-tech.org/ - RIP
http://www.SeattleBlueOvals.com - My Local Site
If we knew what we were doing, we wouldn’t call it research, would we? - Albert Einstein
87 LX N/A 2.3 - CZAJL & EDIS
http://tunexchange.mustang-tech.org/ - RIP
http://www.SeattleBlueOvals.com - My Local Site
If we knew what we were doing, we wouldn’t call it research, would we? - Albert Einstein
-
Jamlx1
- Regular
- Posts: 108
- Joined: Sun Oct 03, 2010 9:56 pm
- Location: Lancaster County - New Holland, Pa
Re: Anyone order a fan controller from dcc
Got an email today saying the controller was just shipped.
Hope it works as well as the ones all of you guys are running.
Hope it works as well as the ones all of you guys are running.
92 Mustang LX- Wild Strawberry:
forged 306, twisted wedge heads, xe-270-hr-12 cam, 1.72 rockers, T5 Zbox, kennebell @ 10 psi with tmoss ported gt40, 1 5/8 bbk long tubes, X-pipe w/cats, mac catback, 3:55's, pmass velocity 95mm, anderson power pipe, 42lb injectors, 190 fuel pump
A9P with A9L GUFB, moates qh 1.6- binary editor and eec analyzer, xd-16 and lc-1
forged 306, twisted wedge heads, xe-270-hr-12 cam, 1.72 rockers, T5 Zbox, kennebell @ 10 psi with tmoss ported gt40, 1 5/8 bbk long tubes, X-pipe w/cats, mac catback, 3:55's, pmass velocity 95mm, anderson power pipe, 42lb injectors, 190 fuel pump
A9P with A9L GUFB, moates qh 1.6- binary editor and eec analyzer, xd-16 and lc-1
Re: Anyone order a fan controller from dcc
i know this thread is a little old, but i NEED one of these bad.
Ive emailed them, but its fallen on def ears.
which controller did you order? do you have a link? I know the fk35 was popular, but i cant find it listed for sale anywhere.
Ive emailed them, but its fallen on def ears.
which controller did you order? do you have a link? I know the fk35 was popular, but i cant find it listed for sale anywhere.
393w. AFR185s. Offbrand EFI victor intake. 04 Mach1 MAF. 30lb holley commander injectors. GUFB strat, A9L2 base tune. 5speed ZF trans. EDIS8.
All in an 85 bronco, one ton axles, 38.5 TSLs.
All in an 85 bronco, one ton axles, 38.5 TSLs.
-
Jamlx1
- Regular
- Posts: 108
- Joined: Sun Oct 03, 2010 9:56 pm
- Location: Lancaster County - New Holland, Pa
Re: Anyone order a fan controller from dcc
I ordered the fk85
Think the site is decontrolled.com
May take 4-6 weeks to receive after ordering
Think the site is decontrolled.com
May take 4-6 weeks to receive after ordering
92 Mustang LX- Wild Strawberry:
forged 306, twisted wedge heads, xe-270-hr-12 cam, 1.72 rockers, T5 Zbox, kennebell @ 10 psi with tmoss ported gt40, 1 5/8 bbk long tubes, X-pipe w/cats, mac catback, 3:55's, pmass velocity 95mm, anderson power pipe, 42lb injectors, 190 fuel pump
A9P with A9L GUFB, moates qh 1.6- binary editor and eec analyzer, xd-16 and lc-1
forged 306, twisted wedge heads, xe-270-hr-12 cam, 1.72 rockers, T5 Zbox, kennebell @ 10 psi with tmoss ported gt40, 1 5/8 bbk long tubes, X-pipe w/cats, mac catback, 3:55's, pmass velocity 95mm, anderson power pipe, 42lb injectors, 190 fuel pump
A9P with A9L GUFB, moates qh 1.6- binary editor and eec analyzer, xd-16 and lc-1
Re: Anyone order a fan controller from dcc
ok, i found their site: http://www.dccontrol.com/introf0.htm
if you just go to dccontrol.com it says the site is down for a redesign.
They list the fk50 and fk85. Think im going to go with the 50. I love the idea of the product, but they really need to work on their customer relations....if i hadnt done some googleing i would have never found their order page. Im kind of leery of ordering...not sure if they are even in business right now. I dont know anyone who has ordered one lately.
if you just go to dccontrol.com it says the site is down for a redesign.
They list the fk50 and fk85. Think im going to go with the 50. I love the idea of the product, but they really need to work on their customer relations....if i hadnt done some googleing i would have never found their order page. Im kind of leery of ordering...not sure if they are even in business right now. I dont know anyone who has ordered one lately.
393w. AFR185s. Offbrand EFI victor intake. 04 Mach1 MAF. 30lb holley commander injectors. GUFB strat, A9L2 base tune. 5speed ZF trans. EDIS8.
All in an 85 bronco, one ton axles, 38.5 TSLs.
All in an 85 bronco, one ton axles, 38.5 TSLs.
-
Jamlx1
- Regular
- Posts: 108
- Joined: Sun Oct 03, 2010 9:56 pm
- Location: Lancaster County - New Holland, Pa
Re: Anyone order a fan controller from dcc
i ordered mind middle of august and was delivered to me around end of sept.
from all that i have read about them they are worth the money.
i did the fk85 to run a markviii fan, but the 50 probably would have worked. i always seem to go bigger with things like that.
from all that i have read about them they are worth the money.
i did the fk85 to run a markviii fan, but the 50 probably would have worked. i always seem to go bigger with things like that.
92 Mustang LX- Wild Strawberry:
forged 306, twisted wedge heads, xe-270-hr-12 cam, 1.72 rockers, T5 Zbox, kennebell @ 10 psi with tmoss ported gt40, 1 5/8 bbk long tubes, X-pipe w/cats, mac catback, 3:55's, pmass velocity 95mm, anderson power pipe, 42lb injectors, 190 fuel pump
A9P with A9L GUFB, moates qh 1.6- binary editor and eec analyzer, xd-16 and lc-1
forged 306, twisted wedge heads, xe-270-hr-12 cam, 1.72 rockers, T5 Zbox, kennebell @ 10 psi with tmoss ported gt40, 1 5/8 bbk long tubes, X-pipe w/cats, mac catback, 3:55's, pmass velocity 95mm, anderson power pipe, 42lb injectors, 190 fuel pump
A9P with A9L GUFB, moates qh 1.6- binary editor and eec analyzer, xd-16 and lc-1
-
86GT
- BE/EA Developer
- Posts: 5151
- Joined: Sat Feb 22, 2003 11:19 pm
- Location: Dixon, California
- Contact:
Re: Anyone order a fan controller from dcc
I too have one and have had it since 2003. Never has it failed
Who is online
Users browsing this forum: No registered users and 12 guests