This is the place for questions about things electrical and mechnanical...or any other automotive-related hardware issue.

Moderators: EDS50, cgrey8, 2Shaker, Jon 94GT

Post Reply
compudude86
Gear Head
Posts: 13
Joined: Tue Apr 17, 2012 6:43 pm

getting into tuning, need some info on my ECU

Post by compudude86 » Tue Apr 17, 2012 6:54 pm

Hello,
I am new to tuning, but not new to cars and computers other than ECUs. I have a computer labeled KCA3, which I figured out uses strategy ATAQ0, but I cannot find a binary file online for it, nor can I find an .XDF (tunerpro) or any other file for any other software relating to this computer. Would anybody here have it? Would anybody be able to help me decode and define it once my moates gear arrives and I can pull a bin off the ECU?
Top
decipha

Re: getting into tuning, need some info on my ECU

Post by decipha » Tue Apr 17, 2012 9:08 pm

98' 2.5L contour ??
Top
compudude86
Gear Head
Posts: 13
Joined: Tue Apr 17, 2012 6:43 pm

Re: getting into tuning, need some info on my ECU

Post by compudude86 » Tue Apr 17, 2012 9:43 pm

that would be it! ATX, non-SVT...
Top
User avatar
tvrfan
Tuning Addict
Posts: 590
Joined: Sat May 14, 2011 11:41 pm
Location: New Zealand

Re: getting into tuning, need some info on my ECU

Post by tvrfan » Wed Apr 18, 2012 12:18 am

If you want to post the binary (as soon as you get hold of one) I will try out my disassembler tool on it and post the results....
TVR, kit cars, classic cars. Ex IT geek, development and databases.
https://github.com/tvrfan/EEC-IV-disassembler
Top
compudude86
Gear Head
Posts: 13
Joined: Tue Apr 17, 2012 6:43 pm

Re: getting into tuning, need some info on my ECU

Post by compudude86 » Wed Apr 18, 2012 1:03 am

alright cool it will be about a week or so moates is on "vacation" right now until the 22nd after that whenever I get the bin I'll shoot it over, thanks!
Top
decipha

Re: getting into tuning, need some info on my ECU

Post by decipha » Thu Apr 19, 2012 8:25 pm

you do realize its not a single bank correct?
Top
compudude86
Gear Head
Posts: 13
Joined: Tue Apr 17, 2012 6:43 pm

Re: getting into tuning, need some info on my ECU

Post by compudude86 » Mon Apr 23, 2012 1:05 am

I am unsure of how "banks" work, would this affect how I rip a BIN off the ECU? Or is this more about how definition works? This "multibank" alone has me nervous about how I am going to get this whole thing off the ground.....
Top
compudude86
Gear Head
Posts: 13
Joined: Tue Apr 17, 2012 6:43 pm

Re: getting into tuning, need some info on my ECU

Post by compudude86 » Tue Apr 24, 2012 6:31 pm

ok, here is the bin I grabbed, the full 256k ECU dump...
You do not have the required permissions to view the files attached to this post.
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests