[SRI3850341]

Disable Altitude Spark
One can now disable the altitude table, this leaves just the sealevel spark table as the only remaining primary spark table.
The memory location to disable the altitude table is:

0x3713-0x3714 [+0x2000 intel offset] opcode DECIMAL: 484 (stock) to 404

Where does one find "the memory location".. Trying to start a fresh tune, forgot how I disabled spark tables, so I went back to the write up, and now confused by that last line....
What does this mean exactly?? 0x3713-0x3714 [+0x2000 intel offset] opcode DECIMAL:

And this too...............

Disable WOT Spark Functions
Sometime in the early 90s Henry stopped using the WOT spark functions and for good reason. Using load as the input for spark
gives much more control and efficiency in spark control. By also referencing load you get a 'ramping' effect on spark.
You also gain control of additional engine modifications without requiring adjustment.
The memory location to disable the WOT functions is:

0x36A1-0x36A2 [+0x2000 intel offset] opcode DECIMAL: 18720 (stock) to 53296

[Paulie]

Read this again: viewtopic.php?f=2&t=20917
The answer hasn't changed.

[SRI3850341]

Read this again: viewtopic.php?f=2&t=20917
The answer hasn't changed.

lol, I guess it hasn't..