This is the place for questions about things electrical and mechnanical...or any other automotive-related hardware issue.

Moderators: EDS50, cgrey8, 2Shaker, Jon 94GT

Post Reply
Zapo
Gear Head
Posts: 2
Joined: Thu Apr 25, 2019 3:26 pm

94 crown vic 4.6 un supported ECM. What ECM to swap to get quaterhorse/eec analyzer support

Post by Zapo » Sun Jul 07, 2019 7:08 pm

Working with a buddy who swapped a 4.6 into a rat rod, needs some tune work to even shift right, It has C3S2 code on the ECM which looks un supported. Hoping to swao to a supported ecm that is close in wiring to support the eec-iv 4.6 AODE combo. Any suggestions?
Top
motorhead1991
Regular
Posts: 238
Joined: Tue Nov 21, 2017 2:32 am

Re: 94 crown vic 4.6 un supported ECM. What ECM to swap to get quaterhorse/eec analyzer support

Post by motorhead1991 » Sun Jul 07, 2019 7:46 pm

Send me the binary, I can tinker with it.

Also, try it with CBAZA (mustang of the same generation).
1990 Ford Ranger FLH2 conversion. Ford forged/dished pistons, Total Seal file-fit rings, Clevite rod and main bearings, Clevite cam bearings, IHI turbo, Siemens Deka 60lb/hr injectors, Ford slot MAF in custom 3" housing. Moates Quarterhorse with Binary Editor, using the PAAD6 database.

OpenEEC Telegram Chat:
Telegram
Top
Zapo
Gear Head
Posts: 2
Joined: Thu Apr 25, 2019 3:26 pm

Re: 94 crown vic 4.6 un supported ECM. What ECM to swap to get quaterhorse/eec analyzer support

Post by Zapo » Mon Jul 08, 2019 12:20 am

I will try and pull a binary. Mustang was not 4.6 EEC iv as far as I know. It was only a 4.6 as a EEC v as it was 5.0 till 1995.
Top
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 27 guests