[Silver_69_Coupe]

Does anyone know where to get the pins for these connectors. I am looking pins for the TPS, Temp, and oil pressure connectors. The insulation is dried out and cracking around the edges. The wire are too long so I can just cut them back a bit and replace the pins in the connector and be good to go. I really do not like the idea of splicing in a pigtail if I don't have to.

[86GT]

I found some of the pins on mouser site but I will have to look after this weekend.

[Silver_69_Coupe]

I found some of the pins on mouser site but I will have to look after this weekend.

I found a possible source but figuring out what one might be a trick.
Does anyone have a source for the OEM part numbers on the pins ford used? I have found bits and pieces but nothing definitive.

https://www.clipsandfasteners.com/O-E-M ... -s/259.htm
http://www.clipsandfasteners.com/v/vspf ... log158.pdf
OR
https://www.bmotorsports.com/shop/produ ... ts_id/3206

[86GT]

I used the A18408-10 from them on the HEGO sensors.

I used mouser as a source for the box style
571-1326032-6
571-1326032-5
571-776129-2

I used mouser as a source for the round style
0331170001
0703338914
0703338914
0703338914

[jsa]

Some time ago I got some items from;
https://www.ronfrancis.com/