[slowbra]

With a little testing, I found out that if I start my car on any of my TwEECer settings "not the bypass setting" that the traction control is disabled and I can't turn it on.

If I turn the switch to the bypass setting "the setting that bypasses the TwEECer and uses the stock EEC programming" that I have full control over it. Then if I switch over to any of the other settings, I still have control of it. As long as this isn't going to harm anything, I kinda like it. I like the fact that the traction control is disabled from the start.

The settings that I have changed are the axle_ratio's and tire_revs/mile

Just looking for opinions..

Shawn