TwEECer is not working!

desmo996 · Post by **desmo996** » Sun Mar 23, 2003 12:27 am

Now, for some reason, everytime I connect the TwEECer Windows XP says an unknown USB device has been connected, or an USB device has malfunctioned. When I uninstall all of the software and start fresh, when I point windows XP to the driver folder in the STKR folder, it gives me an error saying something about the file doesn't contain any driver information. Any suggestions, anyone? Please!

I absolutely despise Windows!

Daren Woodall · Post by **Daren Woodall** » Sun Mar 23, 2003 12:32 am

I did have problem with driver installation when I first received TwEECer. I worked it out somehow and, for the life of me, I can't remember how I fixed it.

Your not alone, if that makes you feel better. This question might get your first "Mike" reply. :-)

desmo996 · Post by **desmo996** » Wed Mar 26, 2003 11:15 am

I have tried to use it on a couple of different computers
with the same results. The computer no longer recognizes the TwEECer. When I plug in the USB cable it says the the device has malfunctioned and that Windows does not recignize the device. So I can not use CalEdit or Calcon, but the Calibration files already on the TwEECer do still function, and I can still change cal. by turning the knob and turn it off also.

Still hoping to hear from Mike on this one.

dremmel9 · Post by **dremmel9** » Thu Mar 27, 2003 9:38 am

you need to read the manual in there it tells you were the driver is for the tweecer and how to install it so your pc will recognize what it is

desmo996 · Post by **desmo996** » Thu Mar 27, 2003 12:12 pm

Been there, done that. I am not having a problem finding the driver, I am having a problem with the TwEECer being recognized by Windows.

Winston · Post by **Winston** » Thu Mar 27, 2003 6:58 pm

Check your PM

dremmel9 · Post by **dremmel9** » Sat Mar 29, 2003 10:41 am

pm??????

desmo996 · Post by **desmo996** » Mon Mar 31, 2003 6:58 pm

That was directed towards me dremmel9.

Well, the Tweecer is definately broken, I reformatted my hard drive, installed Windows XP Pro, and it still doesn't work, same issues as before. So Mike, what can we do about getting this thing fixed?

I got my fingers crossed, Daren.

desmo996 · Post by **desmo996** » Tue Apr 01, 2003 8:42 pm

Well, I have been passed over again.

HEY MIKE, can I get some support here?!!!!!

desmo996 · Post by **desmo996** » Sun Apr 06, 2003 2:59 pm

klondike93 · Post by **klondike93** » Tue Apr 08, 2003 10:00 am

Desmo what did you do? Have you made Mike angry? It seems you keep getting passed over.

Mike G. please help Desmo :D

:?

Klondike (aka Chuck)

desmo996 · Post by **desmo996** » Wed Apr 09, 2003 9:09 am

I must have done something, he seems a little disgruntled with me for some reason. Thanks for the help though klondike93

93Cobra#2771 · Post by **93Cobra#2771** » Tue Apr 15, 2003 12:02 pm

desmo996 wrote: I absolutely despise Windows!

Right there with ya on the windows thing...

Murdock · Post by **Murdock** » Tue Apr 15, 2003 2:19 pm

It worked with the Win XP home edition but on the Pro it was crap. I know in our office XP Pro has been a big hassle.

desmo996 · Post by **desmo996** » Tue Apr 15, 2003 5:18 pm

I have tried every operating system Microsoft has released since Windows 98, and still no dice. I didn't want to do it because the car doesn't run real well without the TwEECer, but I am sending it back for repairs.

klondike93 · Post by **klondike93** » Wed Apr 16, 2003 11:46 am

Any luck yet Desmo?

:(

desmo996 · Post by **desmo996** » Wed Apr 16, 2003 1:44 pm

I just shipped it out this morning, we will see what happens. I am still hopefull that it is software related, but I seriously doubt it at this point.

86GT · Post by **86GT** » Sun Apr 20, 2003 11:41 am

desmo
I have not been following the whole issue, but I had a similar issue with a Micron laptop. The problem was in the drivers for the particular USB drivers. Maybe the issue that you are experiencing is not with the Tweecer or the Operating system itself, but maybe the drivers for the particular PC that you are using. Try using a second PC that is not made by the same vendor. Just a thought.

Raymond_B · Post by **Raymond_B** » Mon Apr 21, 2003 10:34 am

It doesn't look to be software. When loading the drivers on my Win2K desktop the PC blue screened with the TwEECer attached. I went to my laptop running Win98 that I do all my tuning with and it wouldn't even recognize the TwEECer. I'm sending it to Mike today.

desmo996 wrote:I just shipped it out this morning, we will see what happens. I am still hopefull that it is software related, but I seriously doubt it at this point.

desmo996 · Post by **desmo996** » Mon Apr 21, 2003 12:53 pm

Thanks Raymond. I appreciate you keeping me informed.

desmo996 · Post by **desmo996** » Thu May 01, 2003 9:42 pm

I just wanted to see if there has been any update on my TwEECer.

klondike93 · Post by **klondike93** » Thu May 01, 2003 10:03 pm

Nah, they sold it so they could get some beer and pretzels

:?

desmo996 · Post by **desmo996** » Fri May 02, 2003 1:28 pm

That's not funny, I wouldn't put it past him. :D

desmo996 · Post by **desmo996** » Fri May 02, 2003 4:16 pm

WOO HOO! Got my TwEECer back today in the mail, THANKS Mike and Raymond B. :D

klondike93 · Post by **klondike93** » Fri May 02, 2003 5:14 pm

Cool Desmo, now back to work

:?

Buggapimp5.0 · Post by **Buggapimp5.0** » Tue May 06, 2003 4:27 pm

desmo996 wrote:WOO HOO! Got my TwEECer back today in the mail, THANKS Mike and Raymond B. :D

WOOO WOOOO!

TwEECer is not working!

Help offer

Re: TwEECer is not working!

Who is online