Got a new/used Tweecr no USB-it has parallel???

Don 95Vert · Post by **Don 95Vert** » Thu May 08, 2003 8:18 pm

Just got our second Tweecer in the family, mine is a USB, my son got his used-it has a parallel connector. Any special software to get it to work? I had no idea you could get a parallel Tweecer...
Don

93notch · Post by **93notch** » Fri May 09, 2003 12:01 am

Download and install the BDE and CESetup onto the pc, no need for the BDE if you already have it installed. CESetup is the LPT version of the software and we stopped making the LPT units almost 2 years ago.

rl · Post by rl » Fri May 09, 2003 10:42 am

93notch wrote:Download and install the BDE and CESetup onto the pc, no need for the BDE if you already have it installed. CESetup is the LPT version of the software and we stopped making the LPT units almost 2 years ago.

What is the PS2 cable on the tweecer for?

Is it for a 'switch box' to choose programs? If so do I NEED it to make the tweecer work?

I bought it used and all I got was the tweecer, with the power connector, and the parallel and PS2 cables coming out of the black box. I didn't get a 'switch box' with the unit.

If I need one could I make it myself? or would I be better off upgrading the tweecer?

Rob

rl · Post by rl » Fri May 09, 2003 10:56 am

OK, I'm fairly sure the PS2 cable is for the 5 position switch.

Do I NEED this switch for the tweecer to work? (will it work as a 1 program unit without the switch?)

Does anyone have a diagram so that I could make the switch myself?

Can I buy a switch from somewhere?

rl · Post by rl » Sat May 10, 2003 11:57 am

It's with a C3P2 94 Lightning computer if that matters....

moonshine · Post by **moonshine** » Sun May 11, 2003 1:58 pm

I read that with out the switch it defaults to position 1.

I agree that the mini din (ps2-style) is the switch. The parallel is definetly for tweecing. You should be able to buy these parts from the company (Mike Glover).

rl · Post by rl » Sun May 11, 2003 3:02 pm

Humz, It won't read the EEC, and when you try to write to the tweecer I get an "invalid [something]" error. When I try to read it says its not a supported binary. This is a EARLY LPT tweecer and a C3P2 processor.

moonshine · Post by **moonshine** » Sun May 11, 2003 4:52 pm

Dd you download the latest software (1.20B) from the tweecer website ?

I will email you a lhbl0.dat file that you will need. Overwrite the file from the 1.20B3 installation program.

rl · Post by rl » Sun May 11, 2003 4:53 pm

The latest LPT caledit...

moonshine · Post by **moonshine** » Sun May 11, 2003 4:55 pm

need your email address. pm me

rl · Post by rl » Sun May 11, 2003 11:30 pm

CYM

rl@columbus.rr.com

Got a new/used Tweecr no USB-it has parallel???

Re: Got a new/used Tweecr no USB-it has parallel???

Re: Got a new/used Tweecr no USB-it has parallel???

Who is online