calcon not working

venomstang · Post by **venomstang** » Tue Oct 22, 2002 7:14 am

1. Make sure that you have Caledit running
2. On the input/output make sure the "data logging" is checked in the Tweecer box.
3. Hit the "Start Logging" and "Log to file".
4. Start your car.

This is what works for me.

tcgrmt · Post by **tcgrmt** » Thu Oct 24, 2002 9:09 am

I had the same problem, try this via a post Mike G. sent me on Yahoo tweecer group:

In the yahoo group tweecer look under files>software updates> for file A9LPL.DBF. Download this file to replace the one in your STKR>DATA folder.

This worked for me.

Good Luck, Happy Tuning!!

blownholley50 · Post by **blownholley50** » Sun Nov 10, 2002 4:51 pm

tcgrmt wrote:I had the same problem, try this via a post Mike G. sent me on Yahoo tweecer group:

In the yahoo group tweecer look under files>software updates> for file A9LPL.DBF. Download this file to replace the one in your STKR>DATA folder.

This worked for me.

Good Luck, Happy Tuning!!

im having the same problem, at 1st i could just see what the car was dong but could not log, so i downloaded all the new updates and now it will not log the car period, data or regular, any sugestions????????

tcgrmt · Post by **tcgrmt** » Wed Nov 13, 2002 3:46 pm

what processor to you have?

stangsrule · Post by **stangsrule** » Wed Nov 13, 2002 4:04 pm

I am having the same problem with my 92GT with the A9L. Mike sent me the updated file and I just got done trying it but there is no change... I am at a loss as to what the problem is, everything looks like it should work but it doesn't. I am sure it is probably something really simple, it usually is, but I have no clue as to what it is... :? Any more ideas? :)

blownholley50 · Post by **blownholley50** » Fri Nov 15, 2002 10:03 pm

i have the a3m, i had no problems logging a few months back when the car wasrunning, now i go to log a friends and nothing works after the updates!!????

93notch · Post by **93notch** » Sat Nov 16, 2002 3:04 am

Stangsrule: I thought you were an SN95 owner, the file I sent will not help, I will send you and blownholley an updated payload that the rtupdate.exe fuggs up.

stangsrule · Post by **stangsrule** » Sat Nov 16, 2002 3:59 am

I wondered when you pointed out that it was a SN95 file... :D I will give this new one a try and let you know what I find out. Thanks a lot Mike!

stangsrule · Post by **stangsrule** » Sat Nov 16, 2002 6:54 pm

See my last post in Tweaking the EEC"

kartcrz · Post by **kartcrz** » Tue Jan 14, 2003 9:07 pm

I'm new to the tweecer but I've been following emails on the user group in yahoo. Still I'm having no luck. I can download to the tweecer and modify calibrations and see the changes in the way the vehicle runs. However I cannot get the data logging to work. I have the box checked in cal edit and have reloaded the software with and without the update. Still no data logging. I'm running a X3Z processer with an A9L calibration and Windows ME on the laptop. The engine is a stock 1994 351 pickup motor with Cobra intakes , long tube headers and 24lb injectors in an early Bronco. Any help is greatly appreciated.

93notch · Post by **93notch** » Tue Jan 14, 2003 9:20 pm

When you run CalCon, do you:

-- Select the Fox RT Method radio button at the top
-- Click the Start Logging button

If you are doing this already or try this and it still does not work, then email me direct at info@tweecer.com and I will get with you. Please reference this thread and give some contact info.

calcon not working

Who is online