[avbronco]

Ive got my Q/H back and new A9L, loaded up all the tune slots but cannot get my stuff to datalog. Ive checked the boxes I want to datalog(8 of em) and have it on 8 bank tune 2 but even the analog dash is at zero. anybody know what Im doing wrong?

[decipha]

why would you only datalog 8 payloads??? ???
??

log them all except "N_byte" which is for the tweecer

make sure you plug the usb cable in AFTER the ignition is on
let the green indicator illuminate at the lower right of BE and go to payloads,
select all except for N_byte and on the right side save the payload as 'all'

then go to digital dash and click start, once it starts polling fire she up

[avbronco]

Going to try that now, stay tuned....

[avbronco]

Works like a charm.

[avbronco]

Ok, now that I got the digital dashboard to work, and hit start it is showing everything, problem is it isnt saving it in datalog files. It shows 1kb and time but nothing is on excel, now what am I doing wrong?

[cgrey8]

Is the enable datalogging checkbox selected?

[avbronco]

Yes, I read somewhere that sometimes you have to uncheck and check the box again, I will try that next.

[avbronco]

Ok, tried everything but still no datalog. It shows 1kb in be datalogs and the excell screen is there but nothing? also there is no tach on the digatal dashboard.

[junior73]

I had the same issue. I had inadvertently enabled the Datalog Auto Start with a Tag of "None", which could never be reached, so the logs were never being created. ONce it was unchecked, it worked like a champ.

[avbronco]

That was the problem now im a datalogging fool!!!

[junior73]

That was the problem now im a datalogging fool!!!

Glad it worked for ya!